|
 |
We have set up a place for classified ads.
Please do not run ads here on the converation boards.
...
|
0 |
5,231 |
|
|
 |
Starting a restoration project for a 35 hp De La Vergne. This engine was built in 1897 or 98 and is...
|
77 |
6,197 |
|
|
I also had a FM 118 hitch a ride from oilfield country. Ser# is 909751. Someone in the know, can...
|
7 |
188 |
|
|
|
I am restoring a 15 hp Titusville Olin engine. The flywheels do not match and would like to hear...
|
5 |
280 |
|
|
|
Can anyone provide information on how to set up a plastic tub for electrolysis rust removal? I...
|
1 |
162 |
|
|
|
Got 1/2" of ice last night, then about 6" of snow here today.
|
5 |
475 |
|
|
|
Short book, interesting stuff, good time to stay in from the snow storm....
|
0 |
188 |
|
|
|
Building a Reid Oil Field Engine - the whole story...
Just thought I would show you what it...
|
109 |
22,046 |
|
|
|
These big cylinders (346 and 503) have a bad habit of cracking on the inside in the combustion...
|
26 |
942 |
|
|
|
Here's an 8 hp Pattin Bros Ekonomy Tim found still on the well near home. It looks promising and...
|
11 |
1,131 |
|
|
|
The Alamo Iron works Derrick Lamp or Yellow Dog I acquired a few years back,without the original...
|
5 |
1,406 |
|
|
|
Two Of my Yellow Dogs At the Brownsville national Pike show sleeping under my little wooden...
|
0 |
405 |
|
|
|
I just acquired an S.M. Jones pump jack and would like to know more about it. I'm preparing to...
|
7 |
372 |
|
|
|
Does anyone know where I can find parts for this beast?
I/R ES-1 Gas Compressor
10" x 7"
SN#...
|
4 |
244 |
|
|
|
what is a 12hp left reid wroth complete restored on a nice heavy steel wheel runnin gear
|
2 |
362 |
|
|
|
I finally got the reprints finished of the S.M. Jones Acme Sucker Rod catalogs. Anyone that has one...
|
15 |
689 |
|
|
|
Nate and I, Went today to buy a engine up in Lewis Run Pa. and saw this engine along the road.
|
8 |
808 |
|
|
|
I just bought this engine today need some info on it Date and HP if anyone has any idea let me...
|
5 |
594 |
|
|
 |
I am working on a small oilfield display for the Route 66 Flywheelers-Catoosa, OK, show in October...
|
9 |
1,211 |
|
|
|
We are a bronze manufacturer and we have the pattern used by Oil Well Supply Company to make Yellow...
|
9 |
2,788 |
|
|
|
I purchased this engine from near Binghamton, NY. the owner had had the engine for several years,...
|
4 |
748 |
|
|
|
Caught this show early this morning on PBS. Nice history on the Titusville/Oil City region and oil...
|
5 |
574 |
|
|
|
hello all,
I posted several pictures up of an unknown engine that afriend told me about in the...
|
17 |
4,599 |
|
|
|
I am going to be up in the Cool Spring, Bradford and Oil City PA and Olean, NY area on the 18th and...
|
8 |
778 |
|
|
|
I just picked up an oil field lantern like the Oil Supply Company Yellow Dog. Mine is similar in...
|
2 |
762 |
|
|
 |
i have heard of hot tubes and hot bowls but i have no clue how they work can someone help me...
|
19 |
1,620 |
|
|
|
Can someone tell me how much oil goes in a FM 346?:o
|
2 |
181 |
|
|
|
No pumping today!
|
5 |
711 |
|
|
|
Finally got over the hurt of the engine tipping over and breaking a flywheel we started the...
|
4 |
915 |
|
|
|
With the price of crude today, has this brought all the capped and stripper wells back on line? Or...
|
36 |
3,733 |
|
|
|
I am looking for a Jensen pump jack:
|
0 |
205 |
|
|
|
I've been engine & tractor tinkering for yrs.but never anything this big!
I got this engine...
|
8 |
1,058 |
|
|
|
Guys I need some help. I found an engine I am getting but I need some info about it. All I got on...
|
8 |
767 |
|
|
|
I spotted this while deer hunting. It started out as a steam engine,bedplate single 54'' flywheel &...
|
5 |
992 |
|
|
|
This is a 6 1/2X8 Ajax running in cantral Oklahoma during one of our wonderfull Ice Storms...
|
2 |
524 |
|
|
|
I was along either highway 57 or 64 near Mt Vernon, Ill and much to my surprise saw small oil rigs...
|
6 |
710 |
|
|
|
Hello,
New guy here. We have this abandoned well/engine on the family ranch and I would like to...
|
21 |
1,780 |
|
|
|
I've seen threads on on other forums here of OLD pictures.
So I'm starting a thread of OLD...
|
38 |
2,761 |
|
|
|
Hi
If you Google “wico igniter” using the quotes you will find a heading “Gasolene engines;...
|
0 |
168 |
|
|
|
I'm wondering if anyone out there has or knows of a pair of flywheels for a 35 hp superior. The...
|
6 |
402 |
|
|
|
Hello All
Several weeks ago I posted an unidentified engine post.
I will start this thread by...
|
5 |
356 |
|
|
|
I picked this up from a fellow collector in NY- It is a cross between the early model B free-air...
|
1 |
217 |
|
|
 |
Here is a video of my 15hp Reid running at the 2008 Catoosa show. Turn up the volume!! :brows: ...
|
10 |
814 |
|
|
|
I picked a late Bell Manufacturing ZC 503 oilfield engine a while back. I came to find after...
|
3 |
223 |
|
|
|
Cross sectional view from a 1911 Myrick brochure. Note the gasoline and electric ignition...
|
1 |
274 |
|
|
|
Any info on availability of gasket sets/head gasket for Le-Roi D176 would be greatly appreciated....
|
3 |
926 |
|
|
|
I was wondering if Yellow Dogs (Derrick Lanterns) were really used around active oil wells. Its...
|
12 |
1,410 |
|
|
|
Why bother with dynamite and nitro.....
...
|
9 |
1,247 |
|
|
|
My 3 hp Witte, throttle governed running on kerosene.
...
|
3 |
368 |
|
|
|
Very interesting day. A guy I work with told me his brother bought a house over in West Virginia...
|
3 |
2,669 |
|
|
|
Hello all,
I'm looking for any and all information on the Clark Brothers type 2 engines...
|
7 |
1,499 |
