|
 |
i have been looking for one but didn't want to pay 200 plus
so at the sale this past weekend...
|
12 |
676 |
|
|
|
hi guys just want to know how to blacken steel without using paint, thanks for your help Beez
|
4 |
420 |
|
|
|
Hi all, I was at a fallen down old farm where there were a couple fellas loading pick ups with...
|
12 |
843 |
|
|
Where can I find 50/50 Bar Solder??
|
3 |
250 |
|
|
|
Don't know if this is the correct forum but I wanted to hear from some of you experts about what is...
|
2 |
275 |
|
|
|
I need to build up the edges of the steel top plate on an anvil. The top plate is in good condition...
|
4 |
546 |
|
|
|
I had a piece of old RR rail laying around that I had cut into a 14" long piece & had mounting...
|
19 |
3,701 |
|
|
|
A good friend of mine brought this to me. He didn't know what it was used for and neither do I. ...
|
20 |
1,710 |
|
|
|
I have need of a processing/extraction education:lead silver,iron manganese silver and some native...
|
1 |
391 |
|
|
 |
Among all the other active displays at the Stephenson County Antique Engine Club's Old Fashioned...
|
0 |
186 |
|
|
|
Here is a before and after pic of my champion 400 blower that I picked up for $ 20.00 I had...
|
0 |
246 |
|
|
|
I am trying to identify this tool. I think it has something to do with putting rims on wheels, but...
|
2 |
545 |
|
|
 |
Hello,I am new to this group and I am having a little trouble navigating around this site.My name...
|
0 |
183 |
|
|
|
We are going to start building (recreating) a blacksmith shop on our show grounds in Sherrill Iowa....
|
5 |
867 |
|
|
|
I am curious to know if anyone has seen another press like this one, and I am especially curious to...
|
3 |
525 |
|
|
|
We saw a forge in an antique mall for sale. It has a handle you pull to run the blower. Not hand...
|
3 |
938 |
|
|
|
Today I was given this large Charles Parker Co vise. The vise has 8" jaws is 27"long and weighs...
|
2 |
822 |
|
|
|
I purchased a horizontal Little Giant Easy power hammer this weekend and wanting to know more about...
|
2 |
715 |
|
|
|
I recently aquired a fairbanks power hammer model ez11 i would really like some info on this...
|
3 |
542 |
|
|
|
I came across this old blacksmith trip hammer and I was wondering if anyone has any information...
|
6 |
6,346 |
|
|
|
I am looking for some good books that will help me learn the how too's on blacksmithing. Any books...
|
16 |
1,983 |
|
|
|
Why do I have to find massive hunks of iron? I went back to where I found the tinsmith's stake...
|
6 |
2,173 |
|
|
|
Does anyone have any printed information on these tools. I have a couple of them and they all seem...
|
3 |
1,173 |
|
|
|
While cleaning out the contents of an 100 year old warehouse I came across this hardie...what a...
|
7 |
2,350 |
|
|
|
How or where do I set up a small forge that is not coal powered. It won't get a lot of use but...
|
2 |
859 |
|
|
|
Where do you buy coal at that will work good in a old forge, i am going into the blacksmithing...
|
17 |
4,880 |
|
|
|
I heard of a way to fix a bear up anvil (chunks missing)
You can use brazing rod, and pre-heat...
|
13 |
3,186 |
|
|
 |
I know some of you out there must have some old blacksmith tools, well this is your lucky day, i am...
|
10 |
2,720 |
|
|
|
I have a Champion Forge Blower with the Coal grill on a 3 legged stand. It blows up from the bottom...
|
10 |
5,586 |
|
|
|
I need to make a new cam roller and catch block for my 5E. Would Kasenit work well for this?
|
9 |
892 |
|
|
|
Just today I brought home this anvil, didn't need it but it looked neat and in super great...
|
2 |
656 |
|
|
|
I've been messing with petrobond blended sand for sandcasting parts and have run out of fresh sand....
|
3 |
1,083 |
|
|
|
Hello,
We are currently restoring an old engineplow and the frame needs a complete rebuild.
I'm...
|
9 |
765 |
|
|
 |
I acquired this little grinder for my blacksmith shop. Does anyone have any info on this company....
|
5 |
781 |
|
|
|
I am a fan of anything old. I bought a 120 lb Peter Wright Anvil today. I don't know much about...
|
22 |
5,308 |
|
|
|
I finally got some coal and a fired up my blacksmithing forge this morning, got her going good, it...
|
2 |
827 |
|
|
|
I found this little stove today with tools and pot. Does anyone know much about these. Thanks Mike
|
3 |
770 |
|
|
|
We have a cast aluminium steering wheel from a c1920 tractor which at some point in its life has...
|
6 |
1,153 |
|
|
|
An odd question,
My grandfather-in-law was a machinist for many years and had his own shop. When...
|
13 |
1,716 |
|
|
|
Does anyone out there know where to get a mold for a lead hammer????
Thank you
|
5 |
1,445 |
|
|
|
I have lost a bearing cap. Does anyone have any idea where I could get one. Also the blower is...
|
4 |
835 |
|
|
|
Have any of you came across Name Brand Blacksmithing tools in your time of doing this? I recently...
|
7 |
975 |
|
|
|
I have a few wood working chisels that need to be straigntened and rehardened. I'm pretty...
|
3 |
1,244 |
|
|
|
About how tall is the wood log that you mount your anvil too? This is going to be used also,...
|
13 |
2,545 |
|
|
|
Here's a Champion 400 I cleaned up, painted and made a new crank. She's ready for the shop.
|
6 |
2,467 |
|
|
|
If any of you blacksmithing and anvil guys will be coming through the Titusville, Pa. area this...
|
2 |
2,469 |
|
|
|
2008 California Blacksmith Association Spring Conference
...
|
0 |
1,073 |
|
|
|
I saw this at the Mt. Vernon National Engine and Tractor Show.
I thought it was pretty neat, an...
|
0 |
2,150 |
|
|
|
I have repaired several spring shanks from a fertilizer applicator toolbar by MIG welding. In the...
|
4 |
1,496 |
|
|
|
I got a call the other day wanting to know if i had an anvil. I said yes.:O
They wanted to use it...
|
6 |
1,772 |
