Triumph Apple Peeler.

[Wilson Bullivant]

I was looking at a commercial type apple peeler, corer, slicer recently, being run by a hit & miss engine thru a speed reducer set up with a flat belt and idler drive. A very nicely done set up. The load of the angle drive speed reducer was enough to keep the engine running at a fairly constant speed.

The lever that actuates the slicer was broken off, therefore the slicer blade did not operate. I would like to know what actuated the slicer blade, what the lever looked like, etc. It's a mystery.

Is anyone familiar with the machine? Any sugestions, recommendations, etc.? The owner of the peeler would like to get everything going, but needs help. I volunteered. Stak is my first step!

Any help would be appreciated.

Thanks, Wil in NJ.

[clem.248]

i am working on a triumph double peeler, i may have the parts that you are asking about, and would be glad to help you with duplicating these parts,,,the parts that i am missing are the parer blade the holder for the blade, and the shaft assembly all the way up to the pivot assembly which i do have, maybe we can help each other ,, i own a small machine shop, and am able to make replacement parts if i know whay the originals look like,, my cell # is 248 821 4621 and my name is john bender