Need valve and guide Lister J

[B. K. Lahey]

Previous owner has obviously lappped the inlet vaulve and not cleaned the excess paste, check the "wear" on the stem any links as to who makes, or suppies this kind of gear, either in USA or Oz,would be appreciated , exhaust is spot on.
BK

[ListerDiesel]

I have some old J parts in the shed, a used set of bearings and maybe a valve and guide or two. It'll take a few days to dig through, can you confirm the valve head and stem length/diameter?

Peter

[B. K. Lahey]

Thanks Peter I'll do that tomorrow,
BK

[B. K. Lahey]

Peter, the vaulve is 6 1/2ins long, 1 11/16in across the head, and would seem to be 7/16in stem thickness, I'd like to have a scratch around this shed of yours, sounds like it's full of goodies, see ya,

BK

[ListerDiesel]

Originally Posted by B. K. Lahey

Peter, the vaulve is 6 1/2ins long, 1 11/16in across the head, and would seem to be 7/16in stem thickness, I'd like to have a scratch around this shed of yours, sounds like it's full of goodies, see ya,
BK

OK, got those dimensions, I'll go searching later.

Like most junk collections, it is a mixture of bought stuff, spares that came along with engines, and a lot of it was another guy's collection of remnants after he got out of the hobby.

Handy to be able to help folks out occasionally though, so I hung on to most of it.

Peter