Vaughan Motor Works Engine! Parts? Info?

[Shane Ball]

Picked up a 2-cycle Vaughan log saw engine just to mess with and was wondering if there were any parts around? Thanks for any help! Shane

[Skip Landis]

lots here in the northwest. skip

[Chris J]

i am a restorer of drag saws and i have restored several wades, vaughans and multonomahs, i may have a few extra parts for you, pm me and i will give you me e-mail and we can chat, ok i also have about a stack of info that is about 10in. thick in binders too!!

[Tanner Remillard]

I have a few 4 h.p. Vaughan engine castings if thats what you need. Let me know

[George Vaughan]

Shane, are you going to bring that Vaughan to Reidsville this weekend?

[Jim Tremble]

Originally Posted by Shane Ball

Picked up a 2-cycle Vaughan log saw engine just to mess with and was wondering if there were any parts around? Thanks for any help! Shane

Shane

What kind of parts are you looking for ??

Also, which engine did you find ? HP ? What does the rear cover look like ?? (4 bolt-6 bolt) Is there a tag on the engine ? If so, what does it say ?

Vaughn made 2 styles or models of drag saws. A 4 HP and a 2.5-3 HP. That one was called a Lightweight. OR Jr. I have been told that Vaughn also made a larger saw, 5.5-6HP, but I have not seen one nor have seen any data on it.

We have a ton of parts for the Vaughn saws.

That's why they call this place Ironranch.

Jim

[Jim Tremble]

Originally Posted by Chris J

i also have about a stack of info that is about 10in. thick in binders too!!

Chris

Do you have any data on the 5.5-6 HP Vaughn Drag Saw?


Jim

[Chris J]

nope i only have info on the lightweight ne witch is 3.5 HP and the 4 HP one and i have a couple of each, the old styl and the new styl one with the cover on back, i have never heard of that larger one.

[wkramsay]

I am looking for information on a Vaughan 3.5 hp engine. The brass tag says it is # 550 , with a Dec. 1915 patent date. I'm going to need a crankshaft, the rod throw is severely rusted, also I'll need a manual to show how to remove the flywheel from the crank. The piston is frozen in the cylinder but I believe I can free it without breaking it. I have the complete engine including the carburetor.
e-mail is ramsay8@msn.com

[kip]

I am looking for a carburator and a magneto for a vaughan light weight
drag saw...Kip

[Jim Tremble]

Originally Posted by kip

I am looking for a carburator and a magneto for a vaughan light weight
drag saw...Kip

Kip

I have a mixer on Engine Ads, right now. Search for "Lunkenheimer". Call me if interested.

Jim

[PurringOaks]

Chris
I have a Vaughn model L. I have had it for about 54 years and just now getting around to fixing it up. Do you have a picture or parts for the clutch side next to the sprocket. Thank you, Ray Rasmussen 559 855-2398

[PurringOaks]

I have a Vaughn Model L with the diamond 4 bolt cover. I am needing a clutch assembly. I have the sprocket drum with the internal band assembly. Can anyone help with these parts?

Ray Rasmussen
559 855-2398
rmras2@netptc.net