6 H.P. Titan IHC saw rig video

[Fred Van Hook]

This is one more video of my Titan. Running at Evansville just about as slow as I could get it. The last 30 sceonds of it I let run to blow the cobbs out.

[Tom Kilgore]

what was the rpm the engine was running at. just wondering. tom

[Bill Wehrman]

Watching the flywheel hub and the timer at the bottom of the screen, I'm saying 22, maybe 24RPM.

[threshersman]

WOW !!!!!!!! that thing runs SLOWWW

[ssimntih]

Do you use regular gas in that? I had thought about mixing gas and kerosene to slow the burn time down. That way there isn't so much of a shock when it fires.

[Elden DuRand]

Fred:

It looks like you've got that engine firing at better'n half way down the power stroke! Sure does run nice!

Take care - Elden
http://www.oldengine.org/members/durand

[Fred Van Hook]

Thanks Elden, I have the timing at 90 degrees after TDC and the exhaust opens at about 135 degrees. Not much of a power stroke. Also I run it on the compression release.
ssimntih, I use lantern fuel. It doesn't have as much energy and it is easy to light.
Bill, You are correct 22 to 24 rpm's.
That's just about all my secrets!

If you like'm slow here's a Show Off!!