Does anyone have a picture of a fuel mixer for a 6-8 hp Stover KC

Mark S Frank · #1 11-05-2009, 01:23 AM

I need a picture of a fuel mixer for a 6-8 hp Stover KC hit and miss engine. I have no idea what it looks like.
Mark

vern0n · #2 11-05-2009, 08:29 AM

You didn't say weather it was hit & miss or throttle governed. Here is a throttler from a 8hp KD, should be the same as yours only bigger. The hit & miss mixer looks much the same, but there is no throttle plate between it and the carb body. Also they only have one mixture screw compared to three for the throttler.

vern0n · #3 11-05-2009, 08:38 AM

Whoops, my mistake. You did say hit & miss.

Steve Tachoir · #4 11-05-2009, 04:38 PM

I have a picture of one of these mixers. I will post it later tonight. I dont have my camera right now.

Bruce Golden · #5 11-05-2009, 04:54 PM

Steve,
This is whats on my KC 6 hp this what your looking for? If you want I can take a closer pic.

Steve Tachoir · #6 11-05-2009, 06:29 PM

Here is the picture of a natural gas/propane mixer. I believe Bruce's engine has the gasoline carb. I have been trying to find one or the other for my engine for over a year with no luck. Hope the picture helps. Steve

Click image for larger version

Name: KC Mixer.jpg
Views: 84
Size: 127.0 KB
ID: 66386

Mark S Frank · #7 11-05-2009, 11:11 PM

Bruce- Your engine looks just like mine. Could I get you to post a close up of the mixer?
Mark

Bruce Golden · #8 11-06-2009, 06:41 AM

Mark,
Here are some close up pics, I added the sight glass so when I'm priming the engine for start up I can tell when the fuel bowl is full. I hope these pics help.

Mark S Frank · #9 11-07-2009, 12:15 AM

Thanks Bruce, that is what I need to help me locate one.
Mark

Bruce Golden · #10 11-07-2009, 05:40 AM

Mark,
Check with Kenny Meeks he is a sponsor on here I know he had one a few years back at coolsprings he may still have it, I'll keep my eyes open up this way for you too. Glad I could help. Bruce

Terry Nemecek · #11 11-07-2009, 07:51 AM

i have a new old stock stover over flow mixer,it has casting numbers on it. ill get measurements and a picture. if you need, thanks terry nemecek, xxx-xxx-xxxx

Bruce Golden · #12 11-07-2009, 11:29 AM

WOW !!!! That sure was easy enough to find one, wish all parts could be found that easy LOL!!!! Bruce

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads Chosen at Random
Thread	Thread Starter	F o r u m	Replies	Last Post
Picture of mixer for a Monitor VJ 1 1/4 hp	Larry K	Antique Gas Engine Discussion	0	09-15-2006 07:23 PM
Stover KE Picture needed	Dan Bogart	Antique Engine Archives	0	12-13-2003 10:39 PM
Need a Bulldog side-mixer picture	Chris Kirk	Antique Engine Archives	2	11-14-2003 10:16 PM
Stover KC Mixer	Larry Kastens	Antique Engine Archives	0	02-23-2002 06:41 PM
mixer,fuel	ARNOLD HILTABIDEL	Antique Engine Archives	0	10-10-1999 08:36 PM

Does anyone have a picture of a fuel mixer for a 6-8 hp Stover KC

I need a picture of a fuel mixer for a 6-8 hp Stover KC hit and miss engine. I have no idea what it...