Mogul 1hp ignitor spring problem
Hi all, never done this before, so bear with me. I had just got my first mogul it is a 1 hp and as I was going through it and checking it out, I notice someone had made the springs on the ignitor. they was staying open all the time, So I ordered some springs in from Starbolt , I thought this would be a no brainer but I was wrong. I got a manual for the engine but it does not tell how the springs go on the ignitor. On the ignitor there is 3 holes back in the reset( where one of springs goes) Don't Know which hole to use for the hammer trip? The outside spring , I know the hook end connects to the pin but where does the other end go into? there is no other holes in the casting that I see but the 3 holes in the reset part. no room to put the other spring in the hole (can't get by the other spring) can any one Help me out? Pictures? Thanks for any HELP!