Antique Engines and Old Iron
[Home] - [HELP] - [Forums] - [Library] - [Photo Gallery] - [Groups] - [Classified Ads] - [Subscribe] - [Links] - [Books] - [Sponsors] -

Go Back   SmokStak > SmokStak® Old Iron and Tractor Community > Vintage Construction Equipment
Forgot Password? Join Us!

Notices

Vintage Construction Equipment Graders, Shovels, Fork lifts, Dozers & Crawlers, Pay loaders & Fork lifts

Vintage Construction Equipment

Cat No. 9 Auto patrol


this thread has 2 replies and has been viewed 599 times

Reply
 
Thread Tools Display Modes
  #1  
Old 08-23-2017, 08:41:33 PM
SteamfanMN SteamfanMN is offline
Registered-II
 
Join Date: Jan 2012
Location: Erhard, Minnesota
Posts: 379
Thanks: 51
Thanked 133 Times in 81 Posts
Default Cat No. 9 Auto patrol

I haven't dug into this project yet but I am trying to prep myself for the worst. A local show has a Cat with a gas 4 cylinder that has at least one spun rod bearing. A good friend of mine I talked to said parts are hard to come by. Does anyone know of any outlets for parts? Anything I should look at while it is opened up. Was a running and working grader up until the rod spun.
Reply With Quote
Sponsored Links
  #2  
Old 09-09-2017, 09:36:47 PM
Squatch253 Squatch253 is offline
Registered-I
 
Join Date: Dec 2016
Location: Kerrick, Minnesota, USA
Posts: 123
Thanks: 176
Thanked 426 Times in 95 Posts
Default Re: Cat No. 9 Auto patrol

If it is indeed a No.9 it should have a serial number tag on the frame rail (left side toward the front where it makes the downward bend) that should bear the "8A" prefix. The No.9's used the Cat 4200G gas engine that was also used in the L and PL series Twenty tractors. The main and rod bearings are all poured Babbitt with removable shims for setting clearances, and the crankshaft drillings that distribute oil from the mains to the rods are supplied by oil tubes that have soldered fittings on the ends that banjo bolts go through. Each main bearing has an oil line feeding it where the oil then finds its way into the drillings and flow out to the rods. A common problem on these oil supply tubes is to have the banjo fitting come off from stressed and cracked solder, and in the worst cases the line comes out of the fitting completely and starves that main and rod journal of lubrication.

Parts aren't extremely hard to come by since a fair number of Twenty tractors were built and they use the same engine. One nice thing about babbitted bearings is that if you can manage to get the affected crank journal rounded back out and smooth you can always have the bearings poured and line bored to fit it. Usually good used parts can be found with the exception of manifolds - the exhaust, intake, heat box, and drop tube are all usually deteriorated and in poor shape.
Reply With Quote
  #3  
Old 09-09-2017, 09:42:18 PM
Ozlander Ozlander is offline
Registered
 
Join Date: Jun 2016
Location: Rose Hill, Kansas
Posts: 23
Thanks: 0
Thanked 8 Times in 7 Posts
Default Re: Cat No. 9 Auto patrol

For more help go to ACMOC.org.
May be someone living close that can help you.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

F o r u m Jump

Similar Threads Chosen at Random
Thread Thread Starter F o r u m Replies Last Post
Allis Chalmers W Patrol Jeremy Hartle Antique Farm Tractors 4 07-20-2015 10:42:26 PM
Caterpillar Auto Patrol Info Wanted Scott Hosack Vintage Construction Equipment 2 03-29-2014 10:13:11 PM
Caterpillar Auto Patrol #12 DualFuel Vintage Construction Equipment 4 05-05-2013 09:10:57 PM
Adams road patrol 6 Avery22x36 Farm + Industrial Antiques and Collectibles 0 10-17-2011 09:21:13 PM


Use "Ctrl" mouse wheel to change screen size.
All times are GMT -4. The time now is 10:42:25 PM.

Smokstak and Enginads site search!


All use is subject to our TERMS OF SERVICE
SMOKSTAK® is a Registered Trade Mark - A Community of Antique Engine Enthusiasts
Copyright © 2000 - 2016 by Harry Matthews P.O. Box 5612 - Sarasota, FL 34277