Generators and Electric Motors
[Home] - [HELP] - [Forums] - [Groups] - [Classified Ads] - [Subscribe] - [Books] - [Sponsors] -

Go Back   SmokStak > SmokStak® Shop Equipment Tools and Techniques > Welding Shop
Forgot Password? Join Us!

Notices

Welding Shop Welder generators, equipment, weld practice, techniques, troubles and solutions. See our TERMS of SERVICE prior to reading!

Welding Shop

Miller Trailblazer


this thread has 1 replies and has been viewed 1390 times

Reply
 
Thread Tools Display Modes
  #1  
Old 01-03-2016, 03:45:55 AM
Cat3306 Cat3306 is offline
Registered
 
Join Date: Feb 2015
Location: Pasadena, California, USA
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Default Miller Trailblazer

I have an early to mid 80's model Trailblazer. I'm trying to find parts for it. IT also has an issue while it's welding. It will go hot cold hot and cold. The rpms stay the same. The brushes have been replaced and it still does the same thing. Any ideas?
Reply With Quote
Sponsored Links
  #2  
Old 04-19-2018, 12:03:44 AM
Bruisedorange Bruisedorange is offline
Registered
 
Join Date: Apr 2018
Location: Cayucos, California
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default Re: Miller Trailblazer

Yes, I had same issue. Check the field current card, PC2 if I remember correctly. Carefully disconnect the wire harnesses that connect to the board, then check the solder joints on the back of the card. That fixed mine. You're gonna have to inspect with magnifying glass, and also find a solvent to remove protective lacquer coating. Look up Pace worldwide electronics on YouTube, helpful soldering repair videos from the same era as your welder. Hopefully this helps.
Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

F o r u m Jump

Similar Threads Chosen at Random
Thread Thread Starter F o r u m Replies Last Post
Miller Trailblazer 250 g help DanMowerMan Welding Shop 5 04-26-2018 03:20:05 PM
trailblazer 302 Stapes81 Welding Shop 4 03-19-2015 08:43:34 PM
Help with a Miller 44D Trailblazer Welder tdarden Welding Shop 3 03-01-2014 12:35:07 PM
trailblazer/onan seperate? earlcurtis67 Welding Shop 1 11-29-2011 01:05:47 AM


Use "Ctrl" mouse wheel to change screen size.
All times are GMT -4. The time now is 06:26:56 AM.

Smokstak and Enginads site search!


All use is subject to our TERMS OF SERVICE
SMOKSTAK® is a Registered Trade Mark - A Community of Antique Engine Enthusiasts
Copyright © 2000 - 2019 by Harry Matthews P.O. Box 5612 - Sarasota, FL 34277