Antique Tractors
[Home] - [HELP] - [Forums] - [Library] - [Photo Gallery] - [Groups] - [Classified Ads] - [Subscribe] - [Links] - [Books] - [Sponsors] -

Go Back   SmokStak > SmokStak® Old Iron and Tractor Community > Antique Steel Wheel Tractors - Old Iron Lugs and Cleats
Forgot Password? Join Us!

Notices

Antique Steel Wheel Tractors - Old Iron Lugs and Cleats Photos and information about antique steel wheeled farm tractors. This is where to find the heaviest of Old Iron tractors.

Antique Steel Wheel Tractors - Old Iron Lugs and Cleats

Doing a pair of Rumely cylinders


this thread has 11 replies and has been viewed 2240 times

Reply
 
Thread Tools Display Modes
  #1  
Old 01-11-2019, 09:41:25 PM
Reed Engine's Avatar
Reed Engine Reed Engine is offline
Subscriber
 
Join Date: Apr 2009
Location: Hominy, Oklahoma
Posts: 4,061
Thanks: 1,740
Thanked 4,483 Times in 1,737 Posts
Default Doing a pair of Rumely cylinders

Boring and sleeving the cylinders from a Rumley. Not sure of the model but the bore is 8Ē.
Attached Thumbnails
Click image for larger version

Name:	1A4CC6BE-9559-40A9-92DB-8CFBC197E09F.jpg
Views:	474
Size:	171.9 KB
ID:	326171   Click image for larger version

Name:	678DB821-279A-4E97-9212-C19A5FB8362F.jpg
Views:	429
Size:	143.9 KB
ID:	326173  
__________________
Wake up and smell the Fool-Aid.
Reply With Quote
The Following 8 Users Say Thank You to Reed Engine For This Post:
Sponsored Links
  #2  
Old 01-11-2019, 10:51:46 PM
Bubbles Bubbles is offline
Registered-II
 
Join Date: Jul 2009
Location: Oilpull Central
Posts: 360
Thanks: 89
Thanked 495 Times in 218 Posts
Default Re: Doing a pair of Rumley cylinders

20-40 Model G.
Reply With Quote
The Following User Says Thank You to Bubbles For This Post:
  #3  
Old 01-12-2019, 09:16:08 PM
DTurner DTurner is offline
Registered-II
 
Join Date: Dec 2007
Location: Chardon, Ohio , USA
Posts: 208
Thanks: 14
Thanked 21 Times in 18 Posts
Default Re: Doing a pair of Rumley cylinders

Whatís the clearance for that ,between the piston and cylinder?
Reply With Quote
The Following User Says Thank You to DTurner For This Post:
  #4  
Old 01-13-2019, 09:41:31 PM
Mark Schneider Mark Schneider is offline
Subscriber
 
Join Date: Jul 2008
Location: Carrington, North Dakota
Posts: 1,114
Thanks: 1,862
Thanked 2,725 Times in 700 Posts
Default Re: Doing a pair of Rumley cylinders

That's a good question...or slightly rephrased would be "What was the original piston to cylinder bore clearance that Advance Rumely gave their 2 cylinder Oilpull engines when new?"

I imagine that this clearance would be dictated by the operating temperature of the cooling system and the related components under load. Most of the "rule of thumb" clearance numbers used now are calculated assuming water as coolant. With water being used maximum cooling system temps are limited to the boiling point of water...212 degrees F. However the tractor in question uses light oil as a cooling medium without the benefit of a conventional tubular radiator so this temperature has to be hotter...and maybe much hotter?

Has anyone established just how hot the cooling oil gets in an Oilpull engine under load?

Last edited by Mark Schneider; 01-13-2019 at 11:47:24 PM.
Reply With Quote
The Following User Says Thank You to Mark Schneider For This Post:
  #5  
Old 01-13-2019, 10:40:29 PM
FWurth's Avatar
FWurth FWurth is offline
One Millionth Post
 
Join Date: Feb 2007
Location: Freeburg, Illinois, USA
Posts: 6,216
Thanks: 7,275
Thanked 5,659 Times in 2,941 Posts
Images: 4
Default Re: Doing a pair of Rumley cylinders

They run hot enough that any water trapped in the cooling oil will turn to steam and it will vent off like a guyser at Yellowstone! Those big pistons will heat up and expand a good bit, likely will need .008- .010 clearance?
Reply With Quote
The Following 2 Users Say Thank You to FWurth For This Post:
  #6  
Old 01-13-2019, 11:19:23 PM
lukeste lukeste is offline
Subscriber
 
Join Date: Aug 2006
Location: Hillsboro, North Dakota
Posts: 885
Thanks: 1,295
Thanked 4,788 Times in 631 Posts
Images: 1
Default Re: Doing a pair of Rumley cylinders

Just did mine... did 11 thousandths
Reply With Quote
The Following 3 Users Say Thank You to lukeste For This Post:
  #7  
Old 01-18-2019, 09:45:34 AM
Reed Engine's Avatar
Reed Engine Reed Engine is offline
Subscriber
 
Join Date: Apr 2009
Location: Hominy, Oklahoma
Posts: 4,061
Thanks: 1,740
Thanked 4,483 Times in 1,737 Posts
Default Re: Doing a pair of Rumley cylinders

Iím doing them 8.000. The clearance is on the pistons.
__________________
Wake up and smell the Fool-Aid.
Reply With Quote
The Following User Says Thank You to Reed Engine For This Post:
  #8  
Old 01-20-2019, 07:39:00 PM
Reed Engine's Avatar
Reed Engine Reed Engine is offline
Subscriber
 
Join Date: Apr 2009
Location: Hominy, Oklahoma
Posts: 4,061
Thanks: 1,740
Thanked 4,483 Times in 1,737 Posts
Default Re: Doing a pair of Rumely cylinders

A few more pictures.
Attached Thumbnails
Click image for larger version

Name:	BC3EF094-8C88-45C7-AEAB-E018410E59F6.jpg
Views:	265
Size:	125.7 KB
ID:	326781   Click image for larger version

Name:	8D4DD369-7C4C-465D-8783-A2E8AF73BB05.jpg
Views:	250
Size:	151.5 KB
ID:	326782   Click image for larger version

Name:	33150397-6DB1-45C5-9A7D-50D5B77B392A.jpg
Views:	234
Size:	143.0 KB
ID:	326783  
__________________
Wake up and smell the Fool-Aid.
Reply With Quote
  #9  
Old 01-20-2019, 10:31:14 PM
Oilpulled Oilpulled is offline
Subscriber
 
Join Date: Jun 2008
Location: Rockford, Illinois, USA
Posts: 4,032
Thanks: 11,384
Thanked 5,627 Times in 2,166 Posts
Default Re: Doing a pair of Rumely cylinders

Is that a Sunnen hone in the first picture?
Ed
Reply With Quote
The Following User Says Thank You to Oilpulled For This Post:
  #10  
Old 01-21-2019, 04:18:55 PM
AngrySailor AngrySailor is offline
Subscriber
 
Join Date: Apr 2017
Location: West Prince, Prince Edward Isand, Canada
Posts: 1,533
Thanks: 641
Thanked 1,081 Times in 590 Posts
Default Re: Doing a pair of Rumely cylinders

Nice work. Where did you source the material for the sleeves? I have used LA Sleeve for some MUCH small projects, I bet those would not be cheap from them!

What are you using for a honing machine? One friend of mine had converted an old lathe bed with a hydraulic motor and limit switches to feed the hone and its drive motor back and forth. He mostly did BIG hydraulic cylinders, some over 20" bore and 15-20 foot stroke. Ship stuff.
Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

F o r u m Jump

Similar Threads Chosen at Random
Thread Thread Starter F o r u m Replies Last Post
2nd pair fetched W.P.Klein Oil Field Engines & Related Equipment 2 07-04-2016 09:32:35 PM
Pair of 857 Wheelhorses wheelhorseman Garden Tractors / Mowers / Scooters 4 01-07-2014 09:17:08 AM
pair of hurcules zxb dirtycurt Multi-Cylinder Stationary Engines and Power Units 2 07-02-2012 11:51:21 PM
A pair of 3HP 2A's Jim Sherman Antique Engine Photos 2 09-12-2011 08:45:27 AM


Use "Ctrl" mouse wheel to change screen size.
All times are GMT -4. The time now is 11:49:06 AM.

Smokstak and Enginads site search!


All use is subject to our TERMS OF SERVICE
SMOKSTAK® is a Registered Trade Mark - A Community of Antique Engine Enthusiasts
Copyright © 2000 - 2016 by Harry Matthews P.O. Box 5612 - Sarasota, FL 34277