Antique Engines and Old Iron
[Home] - [HELP] - [Forums] - [Library] - [Photo Gallery] - [Groups] - [Classified Ads] - [Subscribe] - [Links] - [Books] - [Sponsors] -

Go Back   SmokStak > SmokStak® Antique Engine Community > Small Air Cooled Gasoline Engines
Forgot Password? Join Us!

Notices

Small Air Cooled Gasoline Engines Briggs & Stratton, Clinton, Lauson, Maytag, Nelson, Wisconsin and other small air cooled engines.

Small Air Cooled Gasoline Engines

Briggs & Stratton ybsxs.5012vp manual?


this thread has 11 replies and has been viewed 399 times

Reply
 
Thread Tools Display Modes
  #1  
Old 01-02-2019, 05:40:16 PM
Railroads Railroads is offline
Registered-III
 
Join Date: Sep 2013
Location: North Carolina, USA
Posts: 1,557
Thanks: 1,106
Thanked 1,269 Times in 523 Posts
Default Briggs & Stratton ybsxs.5012vp manual?

Hi everyone, I got yet another project today. Picked up a Murray riding mower. No deck and the engine is missing everything that could be unbolted pretty much. The block is intact minus a rocker arm and nut. The flywheel, mag, carb, and starter are gone.

I'm looking for manuals for a B&S ybsxs.5012vp 16hp engine??? I want to see if the engine is worth rebuilding or if I am better off just finding another engine along with the 42 inch deck?

If nothing else the frame my end up becoming something else entirely.

Robert
Reply With Quote
Sponsored Links
  #2  
Old 01-03-2019, 12:02:25 AM
ulgydog56 ulgydog56 is offline
Registered-I
 
Join Date: Dec 2017
Location: Smithcreek, Michigan
Posts: 224
Thanks: 22
Thanked 104 Times in 72 Posts
Talking Re: Briggs & Stratton ybsxs.5012vp manual?

try e bay....
Reply With Quote
  #3  
Old 01-03-2019, 01:16:40 AM
K-Tron K-Tron is offline
Registered-III
 
Join Date: Sep 2010
Location: Huntington, NY
Posts: 1,766
Thanks: 840
Thanked 866 Times in 602 Posts
Default Re: Briggs & Stratton ybsxs.5012vp manual?

Had you asked about six months ago I would have given you the one I had. Another fellow on smokstak needed parts for one, so I just mailed him an entire engine. I found one at the curb much like you did, missing too many parts to put it back together. He needed a good cylinder, so away it went. I was happy to not trip over it. In my opinion those engines are not worth investing anything into. They were cheap when new and performed like a cheap engine. You are better off selling what is left of your engine and putting a better engine in its place. Just make sure that engine is not a Kohler Courage, or you will going ten steps backwards!

Chris
Reply With Quote
  #4  
Old 01-03-2019, 02:00:53 AM
Railroads Railroads is offline
Registered-III
 
Join Date: Sep 2013
Location: North Carolina, USA
Posts: 1,557
Thanks: 1,106
Thanked 1,269 Times in 523 Posts
Default Re: Briggs & Stratton ybsxs.5012vp manual?

Quote:
Originally Posted by K-Tron View Post
Had you asked about six months ago I would have given you the one I had. Another fellow on smokstak needed parts for one, so I just mailed him an entire engine. I found one at the curb much like you did, missing too many parts to put it back together. He needed a good cylinder, so away it went. I was happy to not trip over it. In my opinion those engines are not worth investing anything into. They were cheap when new and performed like a cheap engine. You are better off selling what is left of your engine and putting a better engine in its place. Just make sure that engine is not a Kohler Courage, or you will going ten steps backwards!

Chris
Chris, Darn it! Day late.

What would be a good engine to look for? What models of Briggs 16 or 17HP are considered good engines in this day and age? I've never messed with riding mowers much. Always liked my little push mowers.

Robert

Last edited by Railroads; 01-03-2019 at 02:51:45 AM.
Reply With Quote
  #5  
Old 01-03-2019, 09:10:09 AM
I like oldstuff I like oldstuff is offline
Subscriber
 
Join Date: Jan 2012
Location: Milwaukee, Wisconsin, USA
Posts: 5,669
Thanks: 1,376
Thanked 6,062 Times in 2,357 Posts
Default Re: Briggs & Stratton ybsxs.5012vp manual?

Quote:
Originally Posted by K-Tron View Post
Just make sure that engine is not a Kohler Courage, or you will going ten steps backwards! Chris
I'll second that! Somewhere on the stak I posted about replacing a low time Courage short block as the block cracked about 90% around the cylinder base. As a vertical crank I bet if I stood on the cylinder I could have broken the whole thing in half. That cost the guy around $750.
Reply With Quote
  #6  
Old 01-03-2019, 11:36:03 AM
K-Tron K-Tron is offline
Registered-III
 
Join Date: Sep 2010
Location: Huntington, NY
Posts: 1,766
Thanks: 840
Thanked 866 Times in 602 Posts
Default Re: Briggs & Stratton ybsxs.5012vp manual?

Im not sure what the drivetrain is of that tractor, but you could try finding an Onan Performer or a Kohler Command. Both built twin cylinder engines in the 16-20hp range. Briggs & Statton also made a fairly good horizontally opposed twin cylinder engine in this range, but make sure it is an I/C. These engines used to be thrown out at the curb quite often, but the scrap guys are so vicious around here the chance of finding one is slim. Alot of the big horsepower (14+) single cylinder vertical shaft engines hammered so hard they destroyed themselves. If you wanted a new engine, I hate to say it because I do not fancy anything imported, but Kawasaki supposedly makes one of the best vertical shaft air cooled mower engines, and has for the last 10-15 years.

Chris
Reply With Quote
  #7  
Old 01-03-2019, 02:42:48 PM
Railroads Railroads is offline
Registered-III
 
Join Date: Sep 2013
Location: North Carolina, USA
Posts: 1,557
Thanks: 1,106
Thanked 1,269 Times in 523 Posts
Default Re: Briggs & Stratton ybsxs.5012vp manual?

Chris, The scrappers are worse than turkey vultures around my parts as well. I'm partial to Briggs engines so would like to stay with a Briggs engine. The engine that is on the tractor is a single cylinder engine. Engine appears to have no cracks and has compression.

Robert

Last edited by Railroads; 01-03-2019 at 03:04:44 PM.
Reply With Quote
  #8  
Old 01-03-2019, 03:44:37 PM
Railroads Railroads is offline
Registered-III
 
Join Date: Sep 2013
Location: North Carolina, USA
Posts: 1,557
Thanks: 1,106
Thanked 1,269 Times in 523 Posts
Default Re: Briggs & Stratton ybsxs.5012vp manual?

Briggs

Family YBSXS.5012VP 274826

Model 31C707 Type 0175E1 Code 030124ZD

I'm guessing this parts list would fit this engine? https://www.briggsandstratton.com/na...RL_LO.pdf.html

Robert

Last edited by Railroads; 01-03-2019 at 04:16:29 PM.
Reply With Quote
  #9  
Old 01-03-2019, 05:04:20 PM
gdstew gdstew is online now
Registered-II
 
Join Date: Jan 2015
Location: New Philadelphia, Ohio, USA
Posts: 862
Thanks: 229
Thanked 468 Times in 310 Posts
Default Re: Briggs & Stratton ybsxs.5012vp manual?

"Picked up a Murray riding mower. No deck and the engine is missing everything"

What you have is a heavy duty doorstop. Do not waste your time on the engine, do not waste your time on the frame. If it has good tires you might be able to make a portable BBQ grill.
Reply With Quote
  #10  
Old 01-03-2019, 05:21:11 PM
Railroads Railroads is offline
Registered-III
 
Join Date: Sep 2013
Location: North Carolina, USA
Posts: 1,557
Thanks: 1,106
Thanked 1,269 Times in 523 Posts
Default Re: Briggs & Stratton ybsxs.5012vp manual?

I take it your not a fan of this brand or something?

Robert
Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

F o r u m Jump

Similar Threads Chosen at Random
Thread Thread Starter F o r u m Replies Last Post
Briggs & Stratton “FH” instructions & Parts Manual TractorDom Small Air Cooled Gasoline Engines 0 11-28-2015 06:42:41 PM
Briggs and Stratton Model PB manual oldatlas10 Small Air Cooled Gasoline Engines 1 03-22-2014 08:16:20 PM
Old Briggs & Stratton need parts and manual for DAI Small Air Cooled Gasoline Engines 8 02-25-2014 12:25:35 AM
Need Briggs & Stratton owners manual 270373 CaseHead Antique Gas Engine Discussion 5 02-14-2010 04:44:13 PM
Briggs & Stratton Tune-Up Manual Mike in NC Small Air Cooled Gasoline Engines 0 03-18-2007 08:18:20 PM


Use "Ctrl" mouse wheel to change screen size.
All times are GMT -4. The time now is 12:31:29 AM.

Smokstak and Enginads site search!


All use is subject to our TERMS OF SERVICE
SMOKSTAK® is a Registered Trade Mark - A Community of Antique Engine Enthusiasts
Copyright © 2000 - 2016 by Harry Matthews P.O. Box 5612 - Sarasota, FL 34277