Antique Engines and Old Iron
[Home] - [HELP] - [Forums] - [Library] - [Photo Gallery] - [Groups] - [Classified Ads] - [Subscribe] - [Links] - [Books] - [Sponsors] -

Go Back   SmokStak > SmokStak® Antique Engine Community > Hot Air Engines
Forgot Password? Join Us!

Notices

Hot Air Engines Stirling engines, Rider-Ericsson and others.

Hot Air Engines

8 inch Denny Piston "HELP"


this thread has 2 replies and has been viewed 551 times

Reply
 
Thread Tools Display Modes
  #1  
Old 01-09-2017, 03:49:15 PM
Mark K Mark K is offline
Subscriber
 
Join Date: Nov 2004
Location: Welland, Ontario, Canada
Posts: 154
Thanks: 2
Thanked 196 Times in 41 Posts
Default 8 inch Denny Piston "HELP"

I finally got my walking beam repaired. I decided to pull the piston out to check it. The leather ring appears to be ok however there is a thin gasket that appears to have been glued to the top of the transfer piston that is broken. I do not see it in my parts book. Is it necessary? This engine ran for the former owner before the walking beam was damaged. I am new to hot air engines. This is the first on I have had apart. Thanks
Attached Thumbnails
Click image for larger version

Name:	IMG_1397.JPG
Views:	90
Size:	79.9 KB
ID:	272028  
Reply With Quote
Sponsored Links
  #2  
Old 01-09-2017, 07:07:57 PM
Brent Rowell Brent Rowell is offline
Subscriber
 
Join Date: Oct 2005
Location: Lexington, Kentucky, USA
Posts: 217
Thanks: 70
Thanked 564 Times in 106 Posts
Default Re: 8 inch Denny Piston "HELP"

I've never had a Denny but can't imagine why it would have a gasket on the displacer as it should never touch the cylinder walls. Maybe there was an air leak in the top and someone glued that on as a patch(?). Leaks anywhere in the displacer with slow down or stop the engine, so it should be checked very carefully.
Reply With Quote
  #3  
Old 01-17-2017, 09:22:23 AM
Mark K Mark K is offline
Subscriber
 
Join Date: Nov 2004
Location: Welland, Ontario, Canada
Posts: 154
Thanks: 2
Thanked 196 Times in 41 Posts
Default Re: 8 inch Denny Piston "HELP"

Got the engine back together yesterday. I put a propane burner in the firebox and fired it up. It ran good. I also discovered what I believe to have caused the walking beam to break in the first place. The check valve in the bottom of the water pump had came apart and the disc stood up on end causing the pump to jam at the bottom of the stroke, in turn transferring the force up and breaking the walking beam. I will replace the brass nut that holds the check disc in place with a stainless steel lock nut. I was told by the former owner that the walking beam broke when the engine was in operation but he had walked away for a moment and when he returned the beam had broken.
Reply With Quote
The Following 3 Users Say Thank You to Mark K For This Post:
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

F o r u m Jump

Similar Threads Chosen at Random
Thread Thread Starter F o r u m Replies Last Post
8" Denny with the walking beam snapped in half Mark K Hot Air Engines 10 01-31-2017 11:06:41 AM
1914 Fuller Johnson 2 1/2 HP " N " - Piston Rings Claremont Antique Gas Antique Gas Engine Discussion 4 09-20-2014 07:12:12 PM
Cooper "Royal" 20 inch Mower Junkologist Garden Tractors / Mowers / Scooters 2 07-06-2014 11:38:13 PM
Where can i get 1 inch glass tube "for oiler" JKWidener Antique Gas Engine Discussion 7 05-20-2008 07:40:19 PM
What "common engines" had 14 inch flyheels? Mac Leod Antique Gas Engine Discussion 4 10-04-2005 11:54:33 AM


Use "Ctrl" mouse wheel to change screen size.
All times are GMT -4. The time now is 12:26:15 AM.

Smokstak and Enginads site search!


All use is subject to our TERMS OF SERVICE
SMOKSTAK® is a Registered Trade Mark - A Community of Antique Engine Enthusiasts
Copyright © 2000 - 2016 by Harry Matthews P.O. Box 5612 - Sarasota, FL 34277