Generators and Motors
[Home] - [HELP] - [Forums] - [Library] - [Photo Gallery] - [Groups] - [Classified Ads] - [Subscribe] - [Links] - [Books] - [Sponsors] -

Go Back   SmokStak > SmokStak® Vintage Electrical Equipment > Generators & Electric Motors General Discussion > Onan Generators
Forgot Password? Join Us!

Notices

Onan Generators Restoring, operating and maintaining vintage Onan generators.

Onan Generators

Onan Parting Out Thread (Used Onan Parts only!)


this thread has 567 replies and has been viewed 44899 times

Reply
 
Thread Tools Display Modes
  #451  
Old 08-31-2017, 04:46:23 PM
PnishrPW PnishrPW is offline
Registered-II
 
Join Date: May 2012
Location: Western Washington
Posts: 670
Thanks: 448
Thanked 223 Times in 159 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Just a note about Johnny s meters: a lot of them are 5amp full scale, most are able to be taken apart and the scale face removed, flipped over, re-scaled and reassembled. This means they could be re-scaled anywhere from 5 amps up when used with the proper current XFMR. I've "converted" many meters in this fashion.
Reply With Quote
The Following User Says Thank You to PnishrPW For This Post:
Sponsored Links
  #452  
Old 08-31-2017, 05:12:21 PM
JohnnyC JohnnyC is offline
Subscriber
 
Join Date: Jun 2014
Location: Boonton, New Jersey
Posts: 4,852
Thanks: 1,691
Thanked 2,410 Times in 1,400 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Quote:
Originally Posted by PnishrPW View Post
Just a note about Johnny s meters: a lot of them are 5amp full scale, most are able to be taken apart and the scale face removed, flipped over, re-scaled and reassembled. This means they could be re-scaled anywhere from 5 amps up when used with the proper current XFMR. I've "converted" many meters in this fashion.
Thanks! That being said, the 2.5 megawatt meter seen in the picture below would be PERFECT for an Onan 2.5 kilowatt LK with only a slight meter face modification and the proper CT.

JohnnyC
New Jersey
Attached Thumbnails
Click image for larger version

Name:	001.jpg
Views:	36
Size:	162.2 KB
ID:	289950  
Reply With Quote
  #453  
Old 09-01-2017, 12:56:02 AM
PnishrPW PnishrPW is offline
Registered-II
 
Join Date: May 2012
Location: Western Washington
Posts: 670
Thanks: 448
Thanked 223 Times in 159 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Why change the face?... I'd leave it, good test to see who's paying attention.

Be careful, some of the meters look to be 0-1 ma. Just going by the pix, blowing them up on my cell phone - some are hard to read (the infamous "fine" print).
Reply With Quote
  #454  
Old 09-04-2017, 03:57:34 PM
Handyhiker1 Handyhiker1 is offline
Registered-II
 
Join Date: Jul 2014
Location: Akron, Ohio
Posts: 756
Thanks: 427
Thanked 332 Times in 175 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Hay everyone, I am cleaning out the barn some and came accross some parts that are of no use to me.
If you want them just pay postage or small ones are free in an envelope.

1- complete mount for a cck rubber, washers, bolt and spacers.
1- 142-0033 gasket kit, new
1- 141-0078 gasket, new
1- timimng mark plate for cck
1- 148-0017 gasket, new
2- 142-0032 gasket, new

PM me as I don't always chech this thread.
Reply With Quote
The Following 2 Users Say Thank You to Handyhiker1 For This Post:
  #455  
Old 09-06-2017, 04:52:22 PM
BigBlockChev's Avatar
BigBlockChev BigBlockChev is online now
Subscriber
 
Join Date: Jan 2007
Location: Coquitlam, BC, Canada
Posts: 2,032
Thanks: 363
Thanked 1,552 Times in 912 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

I have a JB 120/240 stator only from a gen that I scrapped. It came from a 7.5Kw MDJE . If you have a 3 phase JB and want full output this might do it for you. The case/stack length is 3.620 to the outside of the can where it sits inside the endbells. If yours measures the same it should work. I have checked it with my milliohm meter and it is good, I will check it with a megger as well as soon as my son brings it down from up north. Pm me if interested. Cheers Dan
__________________
It's always something simple.
One test is worth a thousand guesses.
If some is good and more is better then too much is just enough
Reply With Quote
  #456  
Old 09-06-2017, 06:33:47 PM
Handyhiker1 Handyhiker1 is offline
Registered-II
 
Join Date: Jul 2014
Location: Akron, Ohio
Posts: 756
Thanks: 427
Thanked 332 Times in 175 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Quote:
Originally Posted by Handyhiker1 View Post
Hay everyone, I am cleaning out the barn some and came accross some parts that are of no use to me.
If you want them just pay postage or small ones are free in an envelope.

1- complete mount for a cck rubber, washers, bolt and spacers.
1- 142-0033 gasket kit, new
1- 141-0078 gasket, new
1- timimng mark plate for cck
1- 148-0017 gasket, new
2- 142-0032 gasket, new

PM me as I don't always chech this thread.
Update.
The cck mount, 142-0033, 141-0078 are gone.
Reply With Quote
  #457  
Old 09-09-2017, 11:36:40 AM
radiotech radiotech is offline
Registered
 
Join Date: Mar 2017
Location: Rockford, Illinois
Posts: 21
Thanks: 2
Thanked 1 Time in 1 Post
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Quote:
Originally Posted by gjinc View Post
Looking for the panel doors on a 45em enclosure. I guess other enclosures my have the same doors
29.5 x 29.5 inches
I am also looking for one engine cover door for a 45EM. It measures 29.5" x 29.5".
Reply With Quote
  #458  
Old 09-15-2017, 10:44:16 PM
majoday majoday is offline
Registered-II
 
Join Date: Sep 2010
Location: Bloomburg, TX
Posts: 73
Thanks: 9
Thanked 5 Times in 4 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Will that control box work on a 6.00 JB?

I think a look at the schematic for a JB and the DJE would help me think through this.

]Is that a 6.00 control box on that gen set pict?
Reply With Quote
  #459  
Old 09-25-2017, 02:43:11 PM
LRomero LRomero is offline
Subscriber
 
Join Date: Jun 2016
Location: New Iberia, Louisiana
Posts: 386
Thanks: 55
Thanked 122 Times in 79 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Anybody have a complete control box for a 6.5NH? Mine has been previously hacked up and looking to do a swap out if I can.
Reply With Quote
  #460  
Old 09-26-2017, 12:29:09 PM
bobbyt bobbyt is offline
Registered
 
Join Date: Mar 2017
Location: Woodford, Virginia
Posts: 27
Thanks: 20
Thanked 3 Times in 1 Post
Default my ad

https://fredericksburg.craigslist.or...321803129.html

https://fredericksburg.craigslist.or...321770798.html
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

F o r u m Jump

Similar Threads Chosen at Random
Thread Thread Starter F o r u m Replies Last Post
Onan 12.0 DJC parts tim berkemeier Onan Generators 3 09-21-2011 09:11:12 PM
Onan parts Karl Onan Generators 1 04-17-2008 10:22:27 AM
Online Onan Parts Sales-or at least a parts number B.Ikard Onan Generators 3 06-21-2007 07:07:12 AM
Onan cck parts JDavid Onan Generators 1 03-14-2007 10:17:16 AM
Parting out engines thread Handlebar99 Antique Gas Engine Discussion 19 03-27-2006 09:44:37 PM


Use "Ctrl" mouse wheel to change screen size.
All times are GMT -4. The time now is 01:27:31 AM.

Smokstak and Enginads site search!


All use is subject to our TERMS OF SERVICE
SMOKSTAK® is a Registered Trade Mark - A Community of Antique Engine Enthusiasts
Copyright © 2000 - 2016 by Harry Matthews P.O. Box 5612 - Sarasota, FL 34277