Antique Engines and Old Iron
[Home] - [HELP] - [Forums] - [Library] - [Photo Gallery] - [Groups] - [Classified Ads] - [Subscribe] - [Links] - [Books] - [Sponsors] -

Go Back   SmokStak > SmokStak® Antique Engine Community > Scale Model Engineering
Forgot Password? Join Us!

Notices

Scale Model Engineering Steam, gas and hot air model engines, tractors and accessories. Machining and milling castings.

Scale Model Engineering

Hit & Miss Model from Banggood


this thread has 48 replies and has been viewed 4652 times

Reply
 
Thread Tools Display Modes
  #41  
Old 06-07-2019, 09:04:28 PM
steam and oil steam and oil is offline
Registered
 
Join Date: Apr 2019
Location: Philpot, Kentucky
Posts: 9
Thanks: 1
Thanked 3 Times in 3 Posts
Default Re: Hit & Miss Model from Banggood

Piston o-rings are 22mm x 1mm. Oringsandmore.com

---------- Post added at 08:04:28 PM ---------- Previous post was at 07:57:19 PM ----------

Oops!! 20mm x 1mm. That's what happens when I try to go off memory.
Reply With Quote
Sponsored Links
  #42  
Old 06-26-2019, 09:48:19 PM
krawlr's Avatar
krawlr krawlr is offline
Sponsor
 
Join Date: Sep 2008
Location: Williamsburg, Ohio, USA
Posts: 1,246
Thanks: 1,143
Thanked 1,116 Times in 413 Posts
Default Re: Hit & Miss Model from Banggood

So what would the scale of these be? I'm trying to think of a creative way to hide the ignition system and have it sit on a skid.
__________________
Don Edwards

With a sawzall and a MIG welder, everything fits everything.
Reply With Quote
  #43  
Old 06-28-2019, 07:59:21 PM
Tim Venetis Tim Venetis is offline
Subscriber
 
Join Date: Feb 2007
Location: Lagrangeville, New York
Posts: 359
Thanks: 8
Thanked 26 Times in 16 Posts
Default Re: Hit & Miss Model from Banggood

Quote:
Originally Posted by krawlr View Post
So what would the scale of these be? I'm trying to think of a creative way to hide the ignition system and have it sit on a skid.
Hi would these ignitions work as replacement on the engines from banggood
https://www.vellemanstore.com/en/vel...FQ2QaQodqasOCA
Reply With Quote
  #44  
Old 06-28-2019, 09:17:37 PM
krawlr's Avatar
krawlr krawlr is offline
Sponsor
 
Join Date: Sep 2008
Location: Williamsburg, Ohio, USA
Posts: 1,246
Thanks: 1,143
Thanked 1,116 Times in 413 Posts
Default Re: Hit & Miss Model from Banggood

That would work but you'll have to rig some kind of contact points for a trigger and an ignition coil from a points type engine.

For the people having ignition failure I noticed MyFordboy replaced one of the batteries with a metal slug so it ran on 2 cells. This was on the earlier blue models, don't know about the updated ones.
__________________
Don Edwards

With a sawzall and a MIG welder, everything fits everything.
Reply With Quote
  #45  
Old 06-29-2019, 08:30:56 AM
Tim Venetis Tim Venetis is offline
Subscriber
 
Join Date: Feb 2007
Location: Lagrangeville, New York
Posts: 359
Thanks: 8
Thanked 26 Times in 16 Posts
Default Re: Hit & Miss Model from Banggood

Quote:
Originally Posted by krawlr View Post
That would work but you'll have to rig some kind of contact points for a trigger and an ignition coil from a points type engine.

For the people having ignition failure I noticed MyFordboy replaced one of the batteries with a metal slug so it ran on 2 cells. This was on the earlier blue models, don't know about the updated ones.
For anyone interested I found a site that has ignitions for model engines
http://www.model-engine-ignition.com/
Reply With Quote
The Following User Says Thank You to Tim Venetis For This Post:
  #46  
Old 07-03-2019, 04:31:32 PM
Andrew Mackey Andrew Mackey is offline
Sponsor
 
Join Date: Nov 2004
Location: Rockaway, New Jersey USA
Posts: 13,940
Thanks: 1,974
Thanked 6,527 Times in 4,212 Posts
Default Re: Hit & Miss Model from Banggood

This may have been discussed before, but I skipped to the last page. has the new tarriffs affected delivery or price of the bangood engines?
Reply With Quote
  #47  
Old 07-03-2019, 04:55:23 PM
Tim Venetis Tim Venetis is offline
Subscriber
 
Join Date: Feb 2007
Location: Lagrangeville, New York
Posts: 359
Thanks: 8
Thanked 26 Times in 16 Posts
Default Re: Hit & Miss Model from Banggood

Quote:
Originally Posted by Andrew Mackey View Post
This may have been discussed before, but I skipped to the last page. has the new tarriffs affected delivery or price of the bangood engines?
Mine was in customs since the 29th no update.
Reply With Quote
  #48  
Old 07-07-2019, 01:19:13 AM
Tim Venetis Tim Venetis is offline
Subscriber
 
Join Date: Feb 2007
Location: Lagrangeville, New York
Posts: 359
Thanks: 8
Thanked 26 Times in 16 Posts
Default Re: Hit & Miss Model from Banggood

Quote:
Originally Posted by Tim Venetis View Post
Mine was in customs since the 29th no update.
I finally received my engine and I got it going using lighter fluid On the carburetor adjustment you turn it out less than a quarter turn. It was worth the 20 days wait.
Reply With Quote
The Following User Says Thank You to Tim Venetis For This Post:
  #49  
Old 07-10-2019, 11:10:58 AM
Tim Venetis Tim Venetis is offline
Subscriber
 
Join Date: Feb 2007
Location: Lagrangeville, New York
Posts: 359
Thanks: 8
Thanked 26 Times in 16 Posts
Default Re: Hit & Miss Model from Banggood

Quote:
Originally Posted by Tim Venetis View Post
I finally received my engine and I got it going using lighter fluid On the carburetor adjustment you turn it out less than a quarter turn. It was worth the 20 days wait.
The filler hole in the fuel tank is very small how do people fill the tank. I use the spout on a lighter fluid can but the fluid leaks when filling the tank.
Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

F o r u m Jump

Similar Threads Chosen at Random
Thread Thread Starter F o r u m Replies Last Post
New Hit and Miss Owner JD Model E Maytag Model 92 Heelerman Smokstak Forums Meet and Greet 2 10-08-2014 02:24:28 PM
Billy Boy model hit & miss model engine Preston Wells Scale Model Engineering 1 03-03-2012 09:06:05 PM
Model Hit and Miss Tad Wicks Scale Model Engineering 26 08-16-2010 12:04:13 AM
The Mogul Runs! Hit & Miss,Miss,Miss, Miss,Miss Dan Bogart Antique Engine Archives 7 06-24-2003 12:10:08 AM
Model Hit & Miss Benny Mckheean N.C. Antique Engine Archives 4 02-03-2002 05:46:58 PM


Use "Ctrl" mouse wheel to change screen size.
All times are GMT -4. The time now is 03:22:35 AM.

Smokstak and Enginads site search!


All use is subject to our TERMS OF SERVICE
SMOKSTAK® is a Registered Trade Mark - A Community of Antique Engine Enthusiasts
Copyright © 2000 - 2019 by Harry Matthews P.O. Box 5612 - Sarasota, FL 34277