Oil Field Engines
[Home] - [HELP] - [Forums] - [Groups] - [Classified Ads] - [Subscribe] - [Books] - [Sponsors] -

Go Back   SmokStak > SmokStak® Antique Engine Community > Oil Field Engines & Related Equipment
Forgot Password? Join Us!

Notices

Oil Field Engines & Related Equipment OFES members otherwise known as "Oafs". If you like "BIG OLD GREASY RUSTY OIL FIELD ENGINES, you're in the right place. Founded by Russell Farmer.

Oil Field Engines & Related Equipment

IHC LB Flywheel


this thread has 3 replies and has been viewed 948 times

Reply
 
Thread Tools Display Modes
  #1  
Old 06-14-2016, 10:48:41 PM
Donkeypull Donkeypull is offline
Registered
 
Join Date: Apr 2016
Location: Pilesgrove, New Jersey
Posts: 114
Thanks: 0
Thanked 53 Times in 38 Posts
Default IHC LB Flywheel

The spring in handle on my flywheel broke the other day on my IHC LB engine. Is there or where do I begin removing the pin from the flywheel and replacing that broken spring. I have a new spring in hand.
Reply With Quote
Sponsored Links
  #2  
Old 06-15-2016, 12:58:21 AM
Ironsides Ironsides is offline
Registered
 
Join Date: Mar 2009
Location: Bunbury, Western Australia
Posts: 725
Thanks: 57
Thanked 362 Times in 241 Posts
Default Re: IHC LB Flywheel

Be very careful it is quite easy to break the thinner cast iron on the back pin mount.Liberal amounts of WD40 or similar---be very careful with heat also,Norm
Reply With Quote
  #3  
Old 06-15-2016, 04:45:09 AM
Rob Charles Rob Charles is offline
Subscriber
 
Join Date: Nov 2004
Location: New Jersey
Posts: 1,373
Thanks: 1,055
Thanked 1,378 Times in 549 Posts
Default Re: IHC LB Flywheel

Sometimes IHC didn't drill the hole all of the way thru on the LA/Lb FWs . Drill a small hole but big enough for a punch thru the wheel at the underside of the pin and drive it out. There's a small plug at the outside sometimes. Looks like a small flat freeze out plug. Rob
Reply With Quote
  #4  
Old 06-15-2016, 12:05:10 PM
FarmallPaul FarmallPaul is offline
Subscriber
 
Join Date: Feb 2014
Location: Erie, Kansas, USA
Posts: 144
Thanks: 657
Thanked 81 Times in 58 Posts
Default Re: IHC LB Flywheel

Donkeypull- ShopDogSam likes to cut the pin if the inside hole isn't drilled all the way thru. That's what I did, but then you have to replace the pin. Check it out:


https://www.youtube.com/watch?v=XiwuDFMPH9g
Reply With Quote
The Following User Says Thank You to FarmallPaul For This Post:
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

F o r u m Jump

Similar Threads Chosen at Random
Thread Thread Starter F o r u m Replies Last Post
Stover KE,spoke flywheel,solid flywheel weight interchange Matthew Guy Clarke Hit & Miss Gas Engine Discussion 2 12-22-2012 04:14:11 PM
Help with Flywheel dms0115 Vintage Diesel and Oil Stationary Engines 6 05-01-2012 01:28:17 AM
Briggs WI Flywheel vs WMB Flywheel Zim Small Air Cooled Gasoline Engines 2 03-02-2011 12:47:48 AM
Flywheel David Fassett Antique Engine Archives 0 11-16-2002 07:09:54 PM
One flywheel or two? Norm S Antique Engine Archives 5 11-02-2002 02:05:10 AM


Use "Ctrl" mouse wheel to change screen size.
All times are GMT -4. The time now is 01:59:26 AM.

Smokstak and Enginads site search!


All use is subject to our TERMS OF SERVICE
SMOKSTAK® is a Registered Trade Mark - A Community of Antique Engine Enthusiasts
Copyright © 2000 - 2019 by Harry Matthews P.O. Box 5612 - Sarasota, FL 34277