Antique Tractors
[Home] - [HELP] - [Forums] - [Library] - [Photo Gallery] - [Groups] - [Classified Ads] - [Subscribe] - [Links] - [Books] - [Sponsors] -

Go Back   SmokStak > SmokStak® Old Iron and Tractor Community > Antique Steel Wheel Tractors - Old Iron Lugs and Cleats
Forgot Password? Join Us!

Notices

Antique Steel Wheel Tractors - Old Iron Lugs and Cleats Photos and information about antique steel wheeled farm tractors. This is where to find the heaviest of Old Iron tractors.

Antique Steel Wheel Tractors - Old Iron Lugs and Cleats

Rumely 12-20 Restoration


this thread has 140 replies and has been viewed 27434 times

Reply
 
Thread Tools Display Modes
  #1  
Old 02-02-2015, 10:20:20 AM
LukeSte LukeSte is offline
Subscriber
 
Join Date: Aug 2006
Location: Hillsboro, North Dakota
Posts: 921
Thanks: 1,333
Thanked 4,978 Times in 661 Posts
Images: 1
Default Rumely 12-20 Restoration

doing this tractor for a friend. anyone with some of the history of the tractor, please share it with us. came from Canada, north of new York state. think it should be pretty strait forward, lots of leaks a few cracks, a leaky radiator, everything a rumely should be......
Attached Thumbnails
Click image for larger version

Name:	20150201_212919.jpg
Views:	604
Size:	82.7 KB
ID:	217576   Click image for larger version

Name:	20150201_212928.jpg
Views:	487
Size:	99.2 KB
ID:	217577   Click image for larger version

Name:	20150201_212933.jpg
Views:	460
Size:	86.2 KB
ID:	217578   Click image for larger version

Name:	20150201_212941.jpg
Views:	445
Size:	96.3 KB
ID:	217579  
Reply With Quote
Sponsored Links
  #2  
Old 02-02-2015, 10:23:12 AM
LukeSte LukeSte is offline
Subscriber
 
Join Date: Aug 2006
Location: Hillsboro, North Dakota
Posts: 921
Thanks: 1,333
Thanked 4,978 Times in 661 Posts
Images: 1
Default Re: rumely 12-20 restoration.

and some more pics. after superbowl started with a good wash and a bit of disassembly. rear seat and stand incorrect, if anyone has correct parts shoot me a message. gears are pretty sharp but the owner is ok with that, so I believe we will just leave them as is. are the pinion gear semi-steel, or regular steel? I would like to build them up some.
Attached Thumbnails
Click image for larger version

Name:	20150201_212949.jpg
Views:	293
Size:	102.1 KB
ID:	217580   Click image for larger version

Name:	20150201_212954.jpg
Views:	338
Size:	102.8 KB
ID:	217581   Click image for larger version

Name:	20150201_213005.jpg
Views:	328
Size:	84.3 KB
ID:	217582  
Reply With Quote
The Following 6 Users Say Thank You to LukeSte For This Post:
  #3  
Old 02-03-2015, 06:19:09 PM
LukeSte LukeSte is offline
Subscriber
 
Join Date: Aug 2006
Location: Hillsboro, North Dakota
Posts: 921
Thanks: 1,333
Thanked 4,978 Times in 661 Posts
Images: 1
Default Re: rumely 12-20 restoration.

A few surprises exposed last night. no weep holes here! busted exhaust manifold, along with a nice crack. more rust than expected on fenders. fenders are simple fixes though
Attached Thumbnails
Click image for larger version

Name:	20150202_212824.jpg
Views:	314
Size:	68.0 KB
ID:	217694   Click image for larger version

Name:	20150202_205249.jpg
Views:	297
Size:	43.4 KB
ID:	217695   Click image for larger version

Name:	20150202_212836.jpg
Views:	302
Size:	57.9 KB
ID:	217696  
Reply With Quote
The Following 4 Users Say Thank You to LukeSte For This Post:
  #4  
Old 02-03-2015, 07:28:20 PM
LukeSte LukeSte is offline
Subscriber
 
Join Date: Aug 2006
Location: Hillsboro, North Dakota
Posts: 921
Thanks: 1,333
Thanked 4,978 Times in 661 Posts
Images: 1
Default Re: rumely 12-20 restoration.

My new favorite set of tools. 8 point deep impact up to 1.25 inch. makes for fast disassembly
Attached Thumbnails
Click image for larger version

Name:	20150202_212733.jpg
Views:	276
Size:	86.0 KB
ID:	217701  
Reply With Quote
The Following 4 Users Say Thank You to LukeSte For This Post:
  #5  
Old 02-04-2015, 12:17:39 PM
Brasherman Brasherman is offline
Subscriber
 
Join Date: May 2007
Location: Kalamazoo, Michigan, USA
Posts: 2,033
Thanks: 6,251
Thanked 1,276 Times in 909 Posts
Default Re: Rumely 12-20 Restoration

Where in the world did you find them? I had to garage sale to get a mostly complete set of short chrome Craftsman for my tool box!
Reply With Quote
  #6  
Old 02-04-2015, 02:43:34 PM
JSWithers JSWithers is offline
Registered-III
 
Join Date: Dec 2012
Location: Fargo, North Dakota
Posts: 1,536
Thanks: 5,105
Thanked 2,194 Times in 897 Posts
Default Re: Rumely 12-20 Restoration

Quote:
Originally Posted by Brasherman View Post
Where in the world did you find them? I had to garage sale to get a mostly complete set of short chrome Craftsman for my tool box!
Macs hardware in Fargo has a variety of stuff like that as does Northern Tool and Harbor Freight also in Fargo although I think those 2 are national chain stores.
Reply With Quote
  #7  
Old 02-04-2015, 03:03:25 PM
LukeSte LukeSte is offline
Subscriber
 
Join Date: Aug 2006
Location: Hillsboro, North Dakota
Posts: 921
Thanks: 1,333
Thanked 4,978 Times in 661 Posts
Images: 1
Default Re: Rumely 12-20 Restoration

I got mine on amazon.com harbor freight didn't have them. Macs in Fargo maybe occasionally but on.y to 3/4 inch.
Reply With Quote
  #8  
Old 02-06-2015, 07:30:41 AM
JSWithers JSWithers is offline
Registered-III
 
Join Date: Dec 2012
Location: Fargo, North Dakota
Posts: 1,536
Thanks: 5,105
Thanked 2,194 Times in 897 Posts
Default Re: Rumely 12-20 Restoration

Quote:
Originally Posted by lukeste View Post
I got mine on amazon.com harbor freight didn't have them. Macs in Fargo maybe occasionally but on.y to 3/4 inch.
You may be right about Macs. I haven't been in there to look and the sizes above 3/4" may be standard impact sockets in 3/4" drive. Northern Tool has a 16 piece set of standard and deep impact sockets from 3/8" to 13/16". 7/8" to 2" are standard impact socket in 3/4" drive. Harbor Freight does have a 13 piece deep impact socket set in 1/2" drive with sizes from 7/16" to 1 1/4". I may question the quality as they are currently on sale for $24.99.
Reply With Quote
  #9  
Old 02-06-2015, 08:55:34 AM
I like oldstuff I like oldstuff is offline
Subscriber
 
Join Date: Jan 2012
Location: Milwaukee, Wisconsin, USA
Posts: 6,140
Thanks: 1,560
Thanked 7,232 Times in 2,653 Posts
Default Re: Rumely 12-20 Restoration

The HF impacts believe it or not are decent quality. I've beat on a set for a few years and no complaints.
Reply With Quote
The Following User Says Thank You to I like oldstuff For This Post:
  #10  
Old 02-06-2015, 08:21:55 PM
LukeSte LukeSte is offline
Subscriber
 
Join Date: Aug 2006
Location: Hillsboro, North Dakota
Posts: 921
Thanks: 1,333
Thanked 4,978 Times in 661 Posts
Images: 1
Default Re: Rumely 12-20 Restoration

I have my fair share of hf tools. Not all are bad, warranty is good. But no wrenches or screwdrivers from hf, just not good enough for that
Reply With Quote
  #11  
Old 02-07-2015, 12:38:01 AM
LukeSte LukeSte is offline
Subscriber
 
Join Date: Aug 2006
Location: Hillsboro, North Dakota
Posts: 921
Thanks: 1,333
Thanked 4,978 Times in 661 Posts
Images: 1
Default Re: Rumely 12-20 Restoration

No school tomorrow so my oldest helped with teardown. we got a lot done. mag carb radiator head spyder and pulley off. kept his interest for a good 4 hours. as expected head needs a good rebuild. Off to h and j machine
Attached Thumbnails
Click image for larger version

Name:	20150206_190038.jpg
Views:	254
Size:	79.8 KB
ID:	217894  
Reply With Quote
The Following 4 Users Say Thank You to LukeSte For This Post:
  #12  
Old 02-07-2015, 12:43:24 AM
LukeSte LukeSte is offline
Subscriber
 
Join Date: Aug 2006
Location: Hillsboro, North Dakota
Posts: 921
Thanks: 1,333
Thanked 4,978 Times in 661 Posts
Images: 1
Default Re: Rumely 12-20 Restoration

Son Jace tearing down.
Attached Thumbnails
Click image for larger version

Name:	20150206_184729.jpg
Views:	341
Size:	79.9 KB
ID:	217897   Click image for larger version

Name:	20150206_190102.jpg
Views:	301
Size:	75.0 KB
ID:	217898  
Reply With Quote
The Following 12 Users Say Thank You to LukeSte For This Post:
  #13  
Old 02-07-2015, 12:53:48 AM
LukeSte LukeSte is offline
Subscriber
 
Join Date: Aug 2006
Location: Hillsboro, North Dakota
Posts: 921
Thanks: 1,333
Thanked 4,978 Times in 661 Posts
Images: 1
Default Re: Rumely 12-20 Restoration

Pics of progress.cylinders need a good crosshatch. After I got the key out of spyder all went off fine. the key took close to an hour of dinking around. bolts holding down engine were loose as expected.
Attached Thumbnails
Click image for larger version

Name:	20150206_204642.jpg
Views:	284
Size:	72.7 KB
ID:	217902   Click image for larger version

Name:	20150206_190608.jpg
Views:	325
Size:	113.1 KB
ID:	217903   Click image for larger version

Name:	20150206_221118.jpg
Views:	316
Size:	110.3 KB
ID:	217904  
Reply With Quote
The Following 6 Users Say Thank You to LukeSte For This Post:
  #14  
Old 02-07-2015, 08:31:12 AM
Dan thomas Dan thomas is offline
Registered-III
 
Join Date: Oct 2008
Location: Plain City, Ohio, USA
Posts: 196
Thanks: 1,739
Thanked 753 Times in 133 Posts
Default Re: Rumely 12-20 Restoration

Quote:
Originally Posted by lukeste View Post
Son Jace tearing down.
Luke, great pics with son keep it up with him. My son was interested till he noticed girls,hoped he would get interested again but he is late 20s not yet but 5 Jr old grandson shows interest. Hope it lasts,need to keep him away from those girls!!!
Great project keep pics coming. Dan
Also fishing any good this year??
Reply With Quote
The Following 2 Users Say Thank You to Dan thomas For This Post:
  #15  
Old 02-07-2015, 02:25:41 PM
LukeSte LukeSte is offline
Subscriber
 
Join Date: Aug 2006
Location: Hillsboro, North Dakota
Posts: 921
Thanks: 1,333
Thanked 4,978 Times in 661 Posts
Images: 1
Default Re: Rumely 12-20 Restoration

Fishing for perch and walleye has been slow. Fishing for old iron been pretty good. Landed this cross motor this morning, in fact.
Attached Thumbnails
Click image for larger version

Name:	image.jpg
Views:	344
Size:	123.4 KB
ID:	217924  
Reply With Quote
The Following 9 Users Say Thank You to LukeSte For This Post:
  #16  
Old 02-07-2015, 07:47:50 PM
LukeSte LukeSte is offline
Subscriber
 
Join Date: Aug 2006
Location: Hillsboro, North Dakota
Posts: 921
Thanks: 1,333
Thanked 4,978 Times in 661 Posts
Images: 1
Default Re: Rumely 12-20 Restoration

After dinner today I took the hot washer to some parts and the tractor. Too a lot of grease off. Don't know if I have ever seen grease set like concrete like on this.
Attached Thumbnails
Click image for larger version

Name:	image.jpg
Views:	314
Size:	106.6 KB
ID:	217945  
Reply With Quote
The Following 4 Users Say Thank You to LukeSte For This Post:
  #17  
Old 02-07-2015, 11:00:33 PM
Phil Johnson's Avatar
Phil Johnson Phil Johnson is offline
Sponsor
 
Join Date: Jan 2007
Location: Tofield, Alberta, Canada
Posts: 2,040
Thanks: 5,987
Thanked 3,647 Times in 1,146 Posts
Default Re: Rumely 12-20 Restoration

Lots of fun getting that stuff off!
My 20-35 Twin City has a lot of that "concrete grease" on the engine. I've been chiseling it off with an old wood chisel and a hammer. Couldn't hardly mark it with a scraper. Maybe I should keep it and pave part of the floor in my shed with it!!
__________________
It'll be done in good time---impossible might take a little longer!
Reply With Quote
The Following 2 Users Say Thank You to Phil Johnson For This Post:
  #18  
Old 02-08-2015, 11:17:53 PM
LukeSte LukeSte is offline
Subscriber
 
Join Date: Aug 2006
Location: Hillsboro, North Dakota
Posts: 921
Thanks: 1,333
Thanked 4,978 Times in 661 Posts
Images: 1
Default Re: Rumely 12-20 Restoration

After church jace and I lofted off the motor and opened her up. gave the inside a thorough cleaning. maybe tomorrow we will get the pistons out.
Attached Thumbnails
Click image for larger version

Name:	20150208_133552.jpg
Views:	259
Size:	71.7 KB
ID:	218064   Click image for larger version

Name:	20150208_205739.jpg
Views:	266
Size:	76.6 KB
ID:	218065  
Reply With Quote
The Following 7 Users Say Thank You to LukeSte For This Post:
  #19  
Old 02-09-2015, 12:45:15 AM
G Willikers G Willikers is offline
Sponsor
 
Join Date: Mar 2006
Location: Canada
Posts: 12,863
Thanks: 12,236
Thanked 29,343 Times in 7,406 Posts
Default Re: Rumely 12-20 Restoration

This is a great thread and that looks to be a fine project. Thanks for sharing so far.
Those little Oil Pulls would be fun to work on. That's a model I would like to have had. A fellow here brought one down from Stan Reynold's years ago. He did just enough on it to get it running and brought it to one of the shows. The cylinders were worn out, but she would start after a few pulls and ran pretty steady. But smoke! Within seconds, we had a smoke screen across the whole grounds. But he was happy with it and I don't suppose he ever did much more to it.
Reply With Quote
The Following 3 Users Say Thank You to G Willikers For This Post:
  #20  
Old 02-09-2015, 11:17:18 AM
LukeSte LukeSte is offline
Subscriber
 
Join Date: Aug 2006
Location: Hillsboro, North Dakota
Posts: 921
Thanks: 1,333
Thanked 4,978 Times in 661 Posts
Images: 1
Default Re: Rumely 12-20 Restoration

ordered a brush hone this morning, the cylinder wall look as shiny as chrome. a good cross hatch and measure end gap in rings and see if we need new rings....I expect it will. when we do that, we will give the bottom ring the proper treatment so that we can reduce the "oil puke". and babbits look remarkably good. on a quick inspection the governor looks to be in fine shape but will look more closely. rods feel tight in journals, so in all I am pleasantly surprised at how the inside looks...
Reply With Quote
The Following 6 Users Say Thank You to LukeSte For This Post:
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

F o r u m Jump

Similar Threads Chosen at Random
Thread Thread Starter F o r u m Replies Last Post
Restoration of Rumely # 6153 Jerred Ruble Steam Stationary Engines, Traction Engines 25 10-22-2013 09:47:29 AM
WDM 16-30 Model H Rumely Restoration Western Development Museum Antique Steel Wheel Tractors - Old Iron Lugs and Cleats 9 10-31-2012 10:24:08 PM
Rumely 30-60E-restoration help required.... jim burlingham Antique Steel Wheel Tractors - Old Iron Lugs and Cleats 2 11-27-2011 11:54:37 PM
Rumely Oil Pull restoration questions... jim burlingham Antique Steel Wheel Tractors - Old Iron Lugs and Cleats 6 10-15-2010 06:58:06 AM
Rumely 25-40X Restoration, need parts Exmax Antique Steel Wheel Tractors - Old Iron Lugs and Cleats 9 08-07-2010 06:11:34 PM


Use "Ctrl" mouse wheel to change screen size.
All times are GMT -4. The time now is 09:04:20 AM.

Smokstak and Enginads site search!


All use is subject to our TERMS OF SERVICE
SMOKSTAK® is a Registered Trade Mark - A Community of Antique Engine Enthusiasts
Copyright © 2000 - 2019 by Harry Matthews P.O. Box 5612 - Sarasota, FL 34277