Antique Engines and Old Iron
[Home] - [HELP] - [Forums] - [Groups] - [Classified Ads] - [Subscribe] - [Books] - [Sponsors] -

Go Back   SmokStak > SmokStak® Antique Engine Community > Small Air Cooled Gasoline Engines > Wisconsin Engines
Forgot Password? Join Us!

Notices

Wisconsin Engines Single cylinder up to V4 engines.

Wisconsin Engines

Exhaust valve rotator on AEND?


this thread has 3 replies and has been viewed 1442 times

Reply
 
Thread Tools Display Modes
  #1  
Old 01-01-2013, 06:54:09 AM
Jim M. Jim M. is offline
Registered
 
Join Date: Nov 2009
Location: Manteno, Illinois
Posts: 352
Thanks: 983
Thanked 331 Times in 82 Posts
Default Exhaust valve rotator on AEND?

Gentlemen, My AEND has an exhaust valve rotator and a shorter exhaust valve spring. My shop manual doesn't show a rotator on this model. It has a bent stem on it's exhaust valve I believe from using the wrong tool to remove it as the spring is nicked up also. I will replace the Stellite exhaust valve but should I use the rotator or replace it with a standard spring and seat? Did the AEND ever come with a rotator? Thanks and have a happy New Year! Jim

Reply With Quote
Sponsored Links
  #2  
Old 01-01-2013, 03:50:33 PM
Kelley Hulsey Kelley Hulsey is offline
Registered
 
Join Date: Jan 2006
Location: kinmundy, il, usa
Posts: 231
Thanks: 46
Thanked 800 Times in 127 Posts
Default Re: Exhaust valve rotator on AEND?

Ihave a 1958 AEND w/ a rotator also.
Reply With Quote
The Following User Says Thank You to Kelley Hulsey For This Post:
  #3  
Old 01-01-2013, 06:43:50 PM
Phil P Phil P is offline
Registered
 
Join Date: Dec 2008
Location: Okeechobee, Florida, USA
Posts: 1,036
Thanks: 1
Thanked 633 Times in 315 Posts
Default Re: Exhaust valve rotator on AEND?

Hi

The Stellite valve requires the valve rotor. The AEND indicates this valve came installed from the factory and that would include the rotor.

Phil P
Reply With Quote
The Following User Says Thank You to Phil P For This Post:
  #4  
Old 01-01-2013, 07:30:15 PM
Jim M. Jim M. is offline
Registered
 
Join Date: Nov 2009
Location: Manteno, Illinois
Posts: 352
Thanks: 983
Thanked 331 Times in 82 Posts
Default Re: Exhaust valve rotator on AEND?

Thanks guys, Since I didn't see it in my AEN-AENS manual I thought it might be a field upgrade. Jim
Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

F o r u m Jump

Similar Threads Chosen at Random
Thread Thread Starter F o r u m Replies Last Post
1-1/2 HP IHC M Exhaust Valve John Cunningham Hit & Miss Gas Engine Discussion 6 07-14-2009 06:38:10 AM
Exhaust valve setting flasks Hit & Miss Gas Engine Discussion 3 02-26-2008 02:25:12 PM
Exhaust Valve hit by Piston Atique Generators & Electric Motors General Discussion 8 10-12-2004 10:58:49 AM
Exhaust valve springs Eric McKenna Antique Engine Archives 1 07-12-2003 08:05:24 PM
stuck exhaust valve Eric McKenna Antique Engine Archives 5 09-02-2002 05:35:41 PM


Use "Ctrl" mouse wheel to change screen size.
All times are GMT -4. The time now is 07:07:46 PM.

Smokstak and Enginads site search!


All use is subject to our TERMS OF SERVICE
SMOKSTAK® is a Registered Trade Mark - A Community of Antique Engine Enthusiasts
Copyright © 2000 - 2019 by Harry Matthews P.O. Box 5612 - Sarasota, FL 34277