Antique Engines and Old Iron
[Home] - [HELP] - [Forums] - [Library] - [Photo Gallery] - [Groups] - [Classified Ads] - [Subscribe] - [Links] - [Books] - [Sponsors] -

Go Back   SmokStak > SmokStak® Antique Engine Community > Small Air Cooled Gasoline Engines > Wisconsin Engines
Forgot Password? Join Us!

Notices

Wisconsin Engines Single cylinder up to V4 engines.

Wisconsin Engines

Wisconsin THD Possible Trade?


this thread has 15 replies and has been viewed 832 times

Reply
 
Thread Tools Display Modes
  #1  
Old 07-12-2018, 06:11:34 PM
plastikosmd plastikosmd is offline
Registered
 
Join Date: Jul 2008
Location: boston, ma
Posts: 15
Thanks: 1
Thanked 4 Times in 2 Posts
Default Wisconsin THD Possible Trade?

If anyone is in the ri area, I just pulled a thd out of storage. I thought of getting it running but may just sell for parts. Not stuck, was running but governor/throttle linkage needs a spring or 2. Has some extra parts, gears/starter and a pto. The pto would not fit without shortening the shaft. Motor ran with a belt/pulley setup not pto. Maybe someone could use pto on another or use this crank as donor to cut down.
I guess I could sell parts but would prefer it to go as a package. Open to trades for rusty gold.
<a href='https://postimg.cc/image/bsabo13px/' target='_blank'><img src='https://s26.postimg.cc/bsabo13px/98_C054_E3-2_AF6-4326-_A808-2_DAB27_B24_F07.jpg' border='0' alt='98_C054_E3-2_AF6-4326-_A808-2_DAB27_B24_F07'/></a>

---------- Post added at 06:06:45 PM ---------- Previous post was at 06:04:55 PM ----------

Hrm that didnít work

Let me try this



---------- Post added at 06:11:34 PM ---------- Previous post was at 06:06:45 PM ----------

Update:Sorry I would trim out the extra text but I canít seem to find edit button on my phone

Also I can toss a compression tester on it also if needed, seems to puff great against the tape sealing the exhaust so I would guess no stuck valve so (as they may from sitting)

Just hate to part the old girl out and I have way too many projects
Reply With Quote
Sponsored Links
  #2  
Old 07-15-2018, 09:40:33 PM
plastikosmd plastikosmd is offline
Registered
 
Join Date: Jul 2008
Location: boston, ma
Posts: 15
Thanks: 1
Thanked 4 Times in 2 Posts
Default Re: Wisconsin THD possible trade?

Made up some linkages and hit up the scrapyard for some parts to make a runner.

Got it spinning, a lot of afterfire and some backfire. Found the exhaust valves stuck open (common in this motor)


So now it seems the timing is 180 off or maybe 360 as the intake sounds like the exhaust. Switching the plug wires gets the puff out the exhaust. More to do
Reply With Quote
  #3  
Old 07-16-2018, 02:56:40 PM
plastikosmd plastikosmd is offline
Registered
 
Join Date: Jul 2008
Location: boston, ma
Posts: 15
Thanks: 1
Thanked 4 Times in 2 Posts
Default Re: Wisconsin THD Possible Trade?

Ok running like a top, I have to time it, cut shaft for pto and add a generator circuit


Video of it Running:
https://youtu.be/O_aFDIgM5pI
Reply With Quote
The Following User Says Thank You to plastikosmd For This Post:
  #4  
Old 07-16-2018, 09:28:08 PM
s100 s100 is offline
Registered-II
 
Join Date: Jan 2008
Location: Detroit, Michigan, USA
Posts: 790
Thanks: 188
Thanked 458 Times in 315 Posts
Default Re: Wisconsin THD Possible Trade?

I would NOT cut the crankshaft to accommodate the clutch unit. Typically there are more differences between clutch engines and regular engines than just the crankshaft. If memory serves the rear bearing plate is different and maybe the crankcase.

There's not too many applications around that use those engines and most of them are plain output, making the engine easier to sell as is.
Reply With Quote
The Following User Says Thank You to s100 For This Post:
  #5  
Old 07-16-2018, 09:41:54 PM
mschreiber mschreiber is offline
Registered-III
 
Join Date: Jan 2007
Location: crown point ind. or plymouth ma.
Posts: 1,633
Thanks: 2,849
Thanked 1,151 Times in 552 Posts
Default Re: Wisconsin THD Possible Trade?

2 second video?
Reply With Quote
  #6  
Old 07-17-2018, 05:47:50 AM
plastikosmd plastikosmd is offline
Registered
 
Join Date: Jul 2008
Location: boston, ma
Posts: 15
Thanks: 1
Thanked 4 Times in 2 Posts
Default Re: Wisconsin THD Possible Trade?

Thx s100
Maybe I will make up an adapter plate first before cutting. I doubt there is much of a market for the engine anyway. I will just part it out if I get to the point of selling
Reply With Quote
  #7  
Old 07-17-2018, 12:23:22 PM
Vanman Vanman is offline
Subscriber
 
Join Date: Aug 2011
Location: Mission Viejo, California
Posts: 4,651
Thanks: 6,070
Thanked 1,998 Times in 1,362 Posts
Default Re: Wisconsin THD Possible Trade?

Too bad. I'd love to have a Wisconsin twin in my collection, but it would need to be local lol. Parting out is similar to scrapping. A lot of the parts won't sell and another one is destroyed. I could see it for one that had something serious wrong with it, but certainly not a runner.
Reply With Quote
  #8  
Old 07-17-2018, 01:55:07 PM
plastikosmd plastikosmd is offline
Registered
 
Join Date: Jul 2008
Location: boston, ma
Posts: 15
Thanks: 1
Thanked 4 Times in 2 Posts
Default Re: Wisconsin THD Possible Trade?

Maybe I will find a need for it but I need another motor like a hole in head
Wish u were closer, Iím sure we could barter!
Reply With Quote
  #9  
Old 07-24-2018, 09:52:56 AM
plastikosmd plastikosmd is offline
Registered
 
Join Date: Jul 2008
Location: boston, ma
Posts: 15
Thanks: 1
Thanked 4 Times in 2 Posts
Default Re: Wisconsin THD Possible Trade?

Hit up the local scrap yard to get some parts for the a charging circuit. $30 isnít too bad
Reply With Quote
  #10  
Old 07-24-2018, 02:08:05 PM
plastikosmd plastikosmd is offline
Registered
 
Join Date: Jul 2008
Location: boston, ma
Posts: 15
Thanks: 1
Thanked 4 Times in 2 Posts
Default Re: Wisconsin THD Possible Trade?

Pulling the flywheel, looks like a different case around the oil seal on this engine vs the one the stator came off of. I will make a hub and adapter, pics to follow once i go though my scrap pile
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

F o r u m Jump

Similar Threads Chosen at Random
Thread Thread Starter F o r u m Replies Last Post
To trade or not too trade? John Deere LA tractor for JD E 3hp dw1973 Antique Gas Engine Discussion 7 11-18-2012 04:34:08 PM
Trade or Keep Ben Cowan Onan Generators 6 08-04-2012 10:11:42 AM
Ensign JA trade for JK or K Tractasaurus Antique Steel Wheel Tractors - Old Iron Lugs and Cleats 0 04-05-2007 06:55:05 PM
engine trade Steve Traub Antique Engine Archives 4 03-26-2003 07:53:00 PM
TRADE MAG GEAR A.J. TELOWICZ Antique Engine Archives 0 01-29-2003 05:58:30 PM


Use "Ctrl" mouse wheel to change screen size.
All times are GMT -4. The time now is 07:01:02 PM.

Smokstak and Enginads site search!


All use is subject to our TERMS OF SERVICE
SMOKSTAK® is a Registered Trade Mark - A Community of Antique Engine Enthusiasts
Copyright © 2000 - 2016 by Harry Matthews P.O. Box 5612 - Sarasota, FL 34277