Antique Engines and Old Iron
[Home] - [HELP] - [Forums] - [Library] - [Photo Gallery] - [Groups] - [Classified Ads] - [Subscribe] - [Links] - [Books] - [Sponsors] -

Go Back   SmokStak > SmokStak® Antique Engine Community > Antique Gas Engine Discussion
Forgot Password? Join Us!

Notices

Antique Gas Engine Discussion Meet collectors of hit and miss engines, ask questions about collecting, restoring and showing antique flywheel engines.

Antique Gas Engine Discussion

Paige Separator Engine (or Standard)


this thread has 1 replies and has been viewed 1276 times

Reply
 
Thread Tools Display Modes
  #1  
Old 02-28-2009, 09:42:23 PM
Farmall Farmall is offline
Registered-II
 
Join Date: Nov 2004
Location: Virginia
Posts: 155
Thanks: 0
Thanked 6 Times in 4 Posts
Default Paige Separator Engine (or Standard)

Just got a pretty complete Paige separator engine-has the slant fins, Bosch mag, and lever start....but is missing the oiler and I guess, the base because it has four bolt holes on the bottom. Does anyone know what oiler was used and also what the base looked like (or did it have a base?)
Thanks and thanks, Harry.
Reply With Quote
Sponsored Links
  #2  
Old 03-01-2009, 10:30:52 AM
Daniel Dorece Daniel Dorece is offline
Registered-III
 
Join Date: Feb 2005
Location: Kenosha,WI In the little house marked ROVER
Posts: 1,398
Thanks: 278
Thanked 715 Times in 223 Posts
Default Re: Paige Separator Engine (or Standard)

Your Paige engine is from a milking machine. It was built by the Standard Separator Co. of Milwaukee. The Paige Co. was located in Chicago. It bolts directly to the milking machine and has no separate base. These machines came with a rope starting pulley or a hand starting lever. The Paige uses a different muffler then the Standard. The muffler is about 2" in dia. and about 4" long and of cast iron. I have seen these engines with several different oilers on them. The only thing common about the oilers is that they are 1 oz. and have screw in filler plugs. Many of them are nickel plated. The bore of all the Paige engines I have been able to measure is 1/8" larger then the Standard engine. Hope this helps.

Iron Wolf
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

F o r u m Jump

Similar Threads Chosen at Random
Thread Thread Starter F o r u m Replies Last Post
Standard Cream Separator Engine Color? ErikG Antique Gas Engine Discussion 9 08-07-2015 10:52:53 PM
Standard Page Separator engine? Shane Ball Antique Gas Engine Discussion 19 03-14-2015 08:57:49 PM
Standard Cream Separator Engine Kevin Roth Antique Gas Engine Discussion 8 09-21-2009 08:00:30 AM
Standard Cream Separator Engine Question JKKD Antique Gas Engine Discussion 5 12-20-2008 12:28:20 AM
Standard Cream Separator With Engine! David Babcock Antique Gas Engine Discussion 3 04-20-2007 01:56:44 PM


Use "Ctrl" mouse wheel to change screen size.
All times are GMT -4. The time now is 05:14:06 AM.

Smokstak and Enginads site search!


All use is subject to our TERMS OF SERVICE
SMOKSTAK® is a Registered Trade Mark - A Community of Antique Engine Enthusiasts
Copyright © 2000 - 2016 by Harry Matthews P.O. Box 5612 - Sarasota, FL 34277