Antique Engines and Old Iron
[Home] - [HELP] - [Forums] - [Library] - [Photo Gallery] - [Groups] - [Classified Ads] - [Subscribe] - [Links] - [Books] - [Sponsors] -

Go Back   SmokStak > SmokStak® Vintage Electrical Equipment > Delco and other Low Voltage DC Light Plants
Forgot Password? Join Us!

Notices

Delco and other Low Voltage DC Light Plants Antique Generators, Light Plants, Typically 24, 32 or 48 volt although some are 110 volt. DC Lamps, Motors and appliances.

Delco and other Low Voltage DC Light Plants

Delco Light Plant - need help


this thread has 11 replies and has been viewed 2181 times

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 10-09-2017, 11:28:30 AM
Tewks Tewks is offline
Registered
 
Join Date: Jan 2014
Location: Tewksbury, ma
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default Delco Light Plant - need help

I recently bought a delco generator and need some help in identifying it. The tag says. Delco light
600 watts
32 volts service
Patent. 1918
I have attached photos. I have a million questions but the most important are:
1. What model do I have?
2. Does anyone have a schematic for it?
3. Why is the exhaust in a tee?
4. Is there something missing from the top of the cylinder shroud? I can look down and see the valve rocker arms.
5. Is there a source for parts out there. The handle on the double knife switch is broken. The muffler is missing.
6. The engine turns over pretty freely and the valves are opening and closing. It almost feels like there is little or no compression. Is this typical?
7.is it a four or two cycle engine.
8. Does it need a perfect seal on the top and bottom of the tube running from the carb to the crankcase?
9. I am planning on putting 30 weight oil and straight gas in it to start it. Any suggestions would be appreciated.
If you would take the time to answer any of these questions I would appreciate it. I am sorry to say I couldn't t find a way to add my photos. A little more info to help identify.the control panel has the double knife switch in the upper rat corner. To the left is a fuse and to the left of that is the ammeter. ( 0-30). Below it on the left is the starter mechanism and to its right is an alum cast cover for a relay. The gas tank is underneath the gen portion. Thanks
Reply With Quote
 

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

F o r u m Jump

Similar Threads Chosen at Random
Thread Thread Starter F o r u m Replies Last Post
Delco Light Plant 752 Phil King Delco and other Low Voltage DC Light Plants 6 05-31-2015 07:18:01 AM
Identifying Delco-Light light plant WesPete66 Delco and other Low Voltage DC Light Plants 6 10-20-2010 06:41:59 AM
New here -- Delco light plant Bob Early Delco and other Low Voltage DC Light Plants 5 11-17-2005 08:55:54 PM
Delco Light Plant Jordan Delco and other Low Voltage DC Light Plants 4 11-06-2005 07:31:43 PM
delco light plant George Gersmehl Delco and other Low Voltage DC Light Plants 2 05-21-2001 07:29:09 PM


Use "Ctrl" mouse wheel to change screen size.
All times are GMT -4. The time now is 01:39:49 PM.

Smokstak and Enginads site search!


All use is subject to our TERMS OF SERVICE
SMOKSTAK® is a Registered Trade Mark - A Community of Antique Engine Enthusiasts
Copyright © 2000 - 2019 by Harry Matthews P.O. Box 5612 - Sarasota, FL 34277