Generators and Motors
[Home] - [HELP] - [Forums] - [Library] - [Photo Gallery] - [Groups] - [Classified Ads] - [Subscribe] - [Links] - [Books] - [Sponsors] -

Go Back   SmokStak > SmokStak® Vintage Electrical Equipment > Generators & Electric Motors General Discussion > Onan Generators
Forgot Password? Join Us!

Notices

Onan Generators Restoring, operating and maintaining vintage Onan generators.

Onan Generators

Onan Parting Out Thread (Used Onan Parts only!)


this thread has 481 replies and has been viewed 32918 times

Reply
 
Thread Tools Display Modes
  #261  
Old 03-12-2017, 02:20:45 PM
Motorhead's Avatar
Motorhead Motorhead is offline
Subscriber
 
Join Date: May 2007
Location: Central Coast, California
Posts: 3,332
Thanks: 1,465
Thanked 2,180 Times in 1,179 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Quote:
Originally Posted by Tracy T View Post
Looking for the short points tower for a cck. I have a trifuel carb and the tall tower is in the way. Thanks
Check on ebay
__________________
Back of 1958 5CCK
Contractors model
On trailer owned by
"Ma" Bell.
Reply With Quote
Sponsored Links
  #262  
Old 03-12-2017, 03:27:19 PM
steve phillips steve phillips is offline
Registered
 
Join Date: Feb 2010
Location: Burnwell, Kentucky
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

http://www.twinslan.net/~n0nas/manua...0(03-1986).pdf need part 3 150-1612, part 2 150-0096, part 11 150-0639 if any one has them greatly appreciated , thanks steve
Reply With Quote
  #263  
Old 03-12-2017, 07:10:23 PM
Handyhiker1 Handyhiker1 is offline
Registered-II
 
Join Date: Jul 2014
Location: Akron, Ohio
Posts: 551
Thanks: 323
Thanked 248 Times in 125 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

I have a 12.5 JC and need the oil filter canister cover. Mine is bent/dented and leaks.
Reply With Quote
  #264  
Old 03-12-2017, 07:58:36 PM
yellowlister yellowlister is offline
Subscriber
 
Join Date: Feb 2010
Location: Granada Hills, California
Posts: 3,935
Thanks: 1,817
Thanked 1,936 Times in 1,266 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

does anyone have a cooling door for a jc they want to part with? looking at buying another enclosed jc that is missing the door..

Quote:
Originally Posted by Handyhiker1 View Post
I have a 12.5 JC and need the oil filter canister cover. Mine is bent/dented and leaks.
is yours a early jc? take a cartridge filter? i may have one
Reply With Quote
  #265  
Old 03-12-2017, 08:47:26 PM
Handyhiker1 Handyhiker1 is offline
Registered-II
 
Join Date: Jul 2014
Location: Akron, Ohio
Posts: 551
Thanks: 323
Thanked 248 Times in 125 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Yes it is the canister filter. If you have one that you would part with I will sure be interested in it.
Reply With Quote
  #266  
Old 03-14-2017, 10:35:09 AM
electricaldoctor electricaldoctor is offline
Registered-I
 
Join Date: Dec 2011
Location: Kingston, Ontario, Canada
Posts: 9
Thanks: 1
Thanked 1 Time in 1 Post
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

I have a 1988 6.5 KW Onan MCCK gas generator in my boat that is in bad need of an ignition coil. All help on this quest will be greatly appreciated.
~Ken
Reply With Quote
  #267  
Old 03-14-2017, 03:17:02 PM
richardzoom497 richardzoom497 is offline
Registered
 
Join Date: Oct 2014
Location: Rockville, Maryland
Posts: 4
Thanks: 73
Thanked 4 Times in 2 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Someone has a new one ($500), and a used one ($275) part # 166-0382 for sale in the Washington D.C. Craigslist, post id: 6029173491, office phone # 856-786-4096 located in Riverton, I'm not sure where that is.
Reply With Quote
The Following User Says Thank You to richardzoom497 For This Post:
  #268  
Old 03-14-2017, 03:21:45 PM
yellowlister yellowlister is offline
Subscriber
 
Join Date: Feb 2010
Location: Granada Hills, California
Posts: 3,935
Thanks: 1,817
Thanked 1,936 Times in 1,266 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Quote:
Originally Posted by electricaldoctor View Post
I have a 1988 6.5 KW Onan MCCK gas generator in my boat that is in bad need of an ignition coil. All help on this quest will be greatly appreciated.
~Ken

I have one off a rcck engine
Reply With Quote
  #269  
Old 03-14-2017, 03:58:34 PM
electricaldoctor electricaldoctor is offline
Registered-I
 
Join Date: Dec 2011
Location: Kingston, Ontario, Canada
Posts: 9
Thanks: 1
Thanked 1 Time in 1 Post
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Thanks for the lead Richard. I'll give them a shout. Riverton, NJ

~Ken

Can you please email me a pic of your coil. electricaldoctor.ken@gmail.com
Reply With Quote
The Following User Says Thank You to electricaldoctor For This Post:
  #270  
Old 03-15-2017, 03:10:17 PM
electricaldoctor electricaldoctor is offline
Registered-I
 
Join Date: Dec 2011
Location: Kingston, Ontario, Canada
Posts: 9
Thanks: 1
Thanked 1 Time in 1 Post
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Unfortunately, their coil's primary voltage is rated at 6 volts and I have a 12 volt system. The scavenger hunt continues.

~Ken
Reply With Quote
  #271  
Old 03-15-2017, 03:51:55 PM
PopsGarage PopsGarage is online now
Subscriber
 
Join Date: Dec 2013
Location: Barnegat, New Jersey
Posts: 537
Thanks: 147
Thanked 252 Times in 195 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Ken, that is why God gave us resistors, older cars used a resistor in series with a lower voltage coil and a relay or switch to over the resistor when the starter is energized allowing full voltage to the coil for a hotter spark when starting,look for a resistor from a early 60s gm car. ask for a ballast resistor

Bob
Reply With Quote
The Following User Says Thank You to PopsGarage For This Post:
  #272  
Old 03-15-2017, 08:25:17 PM
S Mullins S Mullins is offline
Subscriber
 
Join Date: Jul 2007
Location: Berry, Kentucky
Posts: 243
Thanks: 218
Thanked 86 Times in 57 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Looking for the parts,or some parts to make a 5.0 cck contractor portable.
axle,handles,ect. Thanks

859-391-4414
Reply With Quote
  #273  
Old 03-15-2017, 09:15:38 PM
JohnnyC JohnnyC is offline
Subscriber
 
Join Date: Jun 2014
Location: Boonton, New Jersey
Posts: 3,924
Thanks: 1,115
Thanked 1,789 Times in 1,062 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

SOS - Looking for these style meters (see attached picture below). Need AC Volt meter.

Thanks,

JohnnyC
New Jersey
Attached Thumbnails
Click image for larger version

Name:	001.jpg
Views:	43
Size:	89.7 KB
ID:	277561  
Reply With Quote
  #274  
Old 03-16-2017, 01:28:41 AM
TLB01 TLB01 is offline
Subscriber
 
Join Date: Feb 2017
Location: Seabeck, Washington
Posts: 269
Thanks: 32
Thanked 129 Times in 77 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Yokogawa. Its the OEM.

All over ebay. You want Onan add a bazillion dollars. Otherwise they are reasonable.
Reply With Quote
The Following User Says Thank You to TLB01 For This Post:
  #275  
Old 03-17-2017, 08:11:09 AM
Tracy T Tracy T is offline
Subscriber
 
Join Date: May 2009
Location: Cedarbluff, Virginia, USA
Posts: 1,387
Thanks: 412
Thanked 523 Times in 315 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Quote:
Originally Posted by JohnnyC View Post
SOS - Looking for these style meters (see attached picture below). Need AC Volt meter.

Thanks,

JohnnyC
New Jersey
Those look identical to the meter's in my transfer switch, I had to take one apart to zero it they say Onan but are made by general electric.
Reply With Quote
  #276  
Old 03-17-2017, 12:47:14 PM
gjinc gjinc is offline
Registered-I
 
Join Date: Aug 2014
Location: Caro, Michigan, USA
Posts: 90
Thanks: 35
Thanked 10 Times in 8 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Looking for the panel doors on a 45em enclosure. I guess other enclosures my have the same doors
29.5 x 29.5 inches
Attached Thumbnails
Click image for larger version

Name:	side panel.jpg
Views:	21
Size:	121.2 KB
ID:	277719   Click image for larger version

Name:	enclosure.jpg
Views:	17
Size:	133.2 KB
ID:	277720   Click image for larger version

Name:	side panel removed.jpg
Views:	20
Size:	123.6 KB
ID:	277721  
Reply With Quote
  #277  
Old 03-23-2017, 09:30:21 PM
Handyhiker1 Handyhiker1 is offline
Registered-II
 
Join Date: Jul 2014
Location: Akron, Ohio
Posts: 551
Thanks: 323
Thanked 248 Times in 125 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Looking for the main jet needle valve that goes in the float bowel on a 12.5JC
Reply With Quote
  #278  
Old 03-27-2017, 10:00:03 PM
TLB01 TLB01 is offline
Subscriber
 
Join Date: Feb 2017
Location: Seabeck, Washington
Posts: 269
Thanks: 32
Thanked 129 Times in 77 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Looking for any DKC/DKD parts. Brackets etc. Thermostat housing for MDKC or any D650 Kubota is current top of the search list.

Looking to unload:
MDKC circulation water cooled marine exhaust manifold and raw water pump. Will post pictures upon request.
Reply With Quote
  #279  
Old 04-03-2017, 05:21:55 PM
Handyhiker1 Handyhiker1 is offline
Registered-II
 
Join Date: Jul 2014
Location: Akron, Ohio
Posts: 551
Thanks: 323
Thanked 248 Times in 125 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

I have a Current Transformer, ratio 100:5 A. CAT 180 SHT-101
50-400hz 600v. INS. Class 10KV BIL
These are the numbers on it.

There is another sticker on it and it is kind of bad, but from what I can read. Christie Laboratories, Cleveland Ohio.

I have no idea what it is worth or if it works. If you tell me how to test it I will. Make an offer and it is all yours.
Attached Thumbnails
Click image for larger version

Name:	20170403_170935.jpg
Views:	29
Size:	64.2 KB
ID:	279157   Click image for larger version

Name:	20170403_170837.jpg
Views:	27
Size:	68.2 KB
ID:	279158  
Reply With Quote
  #280  
Old 04-04-2017, 11:32:09 PM
rattlenbang rattlenbang is offline
Registered
 
Join Date: Jan 2017
Location: victoria, BC, Canada
Posts: 34
Thanks: 5
Thanked 1 Time in 1 Post
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Looking for a pair of heads and push rods for a 4 cylinder MDJC
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

F o r u m Jump

Similar Threads Chosen at Random
Thread Thread Starter F o r u m Replies Last Post
Onan 12.0 DJC parts tim berkemeier Onan Generators 3 09-21-2011 09:11:12 PM
Onan parts Karl Onan Generators 1 04-17-2008 10:22:27 AM
Online Onan Parts Sales-or at least a parts number B.Ikard Onan Generators 3 06-21-2007 07:07:12 AM
Onan cck parts JDavid Onan Generators 1 03-14-2007 10:17:16 AM
Parting out engines thread Handlebar99 Antique Gas Engine Discussion 19 03-27-2006 09:44:37 PM


Use "Ctrl" mouse wheel to change screen size.
All times are GMT -4. The time now is 10:03:50 AM.

Smokstak and Enginads site search!


All use is subject to our TERMS OF SERVICE
SMOKSTAK® is a Registered Trade Mark - A Community of Antique Engine Enthusiasts
Copyright © 2000 - 2016 by Harry Matthews P.O. Box 5612 - Sarasota, FL 34277