Generators and Motors
[Home] - [HELP] - [Forums] - [Library] - [Photo Gallery] - [Groups] - [Classified Ads] - [Subscribe] - [Links] - [Books] - [Sponsors] -

Go Back   SmokStak > SmokStak® Vintage Electrical Equipment > Generators & Motors General Discussion > Onan Generators
Forgot Password? Join Us!

Notices

Onan Generators Restoring, operating and maintaining vintage Onan generators.

Onan Generators

Onan Parting Out Thread (Used Onan Parts only!)


this thread has 276 replies and has been viewed 18853 times

Reply
 
Thread Tools Display Modes
  #41  
Old 09-01-2016, 12:39:08 AM
Motorhead's Avatar
Motorhead Motorhead is offline
Subscriber
 
Join Date: May 2007
Location: Central Coast, California
Posts: 2,799
Thanks: 1,102
Thanked 1,737 Times in 983 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Here is an excellent condition 4.0CCK armature out of a 1976 model square head. 120/240. It was out of a low hour set where I think the electronic engine/charge control crapped out. I chucked it up on my lathe and did a very light tooled clean cut on the segmented part of the armature and cleaned the slip rings. The streaks on the brass and copper is some light silicone to keep the parts from oxidizing. I ran the generator and checked the voltage before I pulled it apart. I have the stator also but it has some rust. Sell for cheap or give it to someone that really needs it and not just to re-sell it. I'll post the serial and spec tomorrow.
Attached Thumbnails
Click image for larger version

Name:	IMG_2809 (960x1280).jpg
Views:	41
Size:	114.0 KB
ID:	261766   Click image for larger version

Name:	IMG_2810 (960x1280).jpg
Views:	37
Size:	89.8 KB
ID:	261767   Click image for larger version

Name:	IMG_2811 (1280x960).jpg
Views:	32
Size:	107.7 KB
ID:	261768  
__________________
My First Onan. 1972 5.0CCK. Tri fuel carburetor, high compression heads.
Reply With Quote
Sponsored Links
  #42  
Old 09-01-2016, 01:19:37 AM
Vanman Vanman is offline
Subscriber
 
Join Date: Aug 2011
Location: Mission Viejo, California
Posts: 2,460
Thanks: 2,848
Thanked 962 Times in 677 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

When you say segmented part of the armature, you mean the copper commutator and Not the iron part with the windings in the slots. Right?
Reply With Quote
  #43  
Old 09-01-2016, 01:45:39 AM
Motorhead's Avatar
Motorhead Motorhead is offline
Subscriber
 
Join Date: May 2007
Location: Central Coast, California
Posts: 2,799
Thanks: 1,102
Thanked 1,737 Times in 983 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Quote:
Originally Posted by Vanman View Post
When you say segmented part of the armature, you mean the copper commutator and Not the iron part with the windings in the slots. Right?
Yes... The armature iron segments are as they came out of the generator end. I just cleaned the outer area. I cleaned in between the copper segments.
__________________
My First Onan. 1972 5.0CCK. Tri fuel carburetor, high compression heads.
Reply With Quote
The Following User Says Thank You to Motorhead For This Post:
  #44  
Old 09-07-2016, 01:22:33 AM
yellowlister yellowlister is offline
Subscriber
 
Join Date: Feb 2010
Location: Granada Hills, California
Posts: 3,553
Thanks: 1,433
Thanked 1,659 Times in 1,106 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Quote:
Originally Posted by Oldpart View Post
Joe, If turtmaster decides against the black pipe exhaust or if you have another like it I'm interested. Most of the ones I see are the down type.

Exhaust manifold is yours if your still interested
Reply With Quote
  #45  
Old 09-07-2016, 06:51:46 AM
krc002 krc002 is offline
Registered-II
 
Join Date: Aug 2009
Location: Walkersville, MD, USA
Posts: 306
Thanks: 152
Thanked 38 Times in 14 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Hey,

Does anyone have an old data plate off of a scrapped 12.5 or 15 kw single phase or even a re-connectable JC or RJC that shows single phase voltage configurations? Wanting to find one...

Thanks,
Ken
Reply With Quote
  #46  
Old 09-07-2016, 06:55:36 AM
Oldpart Oldpart is offline
Registered-I
 
Join Date: Oct 2014
Location: Darragh, Pennsylvania
Posts: 81
Thanks: 12
Thanked 36 Times in 25 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

I am interested. PM me a price and I'll send you the money. Do you have the steel angle bracket to attach the governor spring to for a CCK? I want to eliminate the mechanical fuel pump. The bracket utilizes the fuel pump mounting holes.
Thanks
Reply With Quote
  #47  
Old 09-07-2016, 11:15:29 AM
yellowlister yellowlister is offline
Subscriber
 
Join Date: Feb 2010
Location: Granada Hills, California
Posts: 3,553
Thanks: 1,433
Thanked 1,659 Times in 1,106 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Pretty sure I have a I'd tag from a 12.5 jc 3cr.

I'll check on the bracket I should.
Reply With Quote
The Following User Says Thank You to yellowlister For This Post:
  #48  
Old 09-07-2016, 12:37:33 PM
Tony Clever Tony Clever is offline
Subscriber
 
Join Date: Jul 2015
Location: Fort Loudon, Pennsylvania, USA
Posts: 114
Thanks: 124
Thanked 92 Times in 41 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Any Intake that fits a 2 Cylinder 6.0 DJE or DJB between the Head and Air Filter.
Reply With Quote
  #49  
Old 09-07-2016, 12:45:01 PM
yellowlister yellowlister is offline
Subscriber
 
Join Date: Feb 2010
Location: Granada Hills, California
Posts: 3,553
Thanks: 1,433
Thanked 1,659 Times in 1,106 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Quote:
Originally Posted by Tony Clever View Post
Any Intake that fits a 2 Cylinder 6.0 DJE or DJB between the Head and Air Filter.
Yes.. have that as well
Reply With Quote
  #50  
Old 09-07-2016, 01:08:29 PM
Tony Clever Tony Clever is offline
Subscriber
 
Join Date: Jul 2015
Location: Fort Loudon, Pennsylvania, USA
Posts: 114
Thanks: 124
Thanked 92 Times in 41 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Great I have Pictures of mine that is broke in http://www.smokstak.com/forum/showthread.php?t=161453 post # 6 for you to compare to. If it is right how much for it. I can send money out right away VIA Post Office or do a Pay Pal if you would prefer that. Thanks
Reply With Quote
  #51  
Old 09-07-2016, 01:38:16 PM
yellowlister yellowlister is offline
Subscriber
 
Join Date: Feb 2010
Location: Granada Hills, California
Posts: 3,553
Thanks: 1,433
Thanked 1,659 Times in 1,106 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

thats the one.. mine is from a military dje.. so its not green..
Reply With Quote
  #52  
Old 09-07-2016, 01:54:48 PM
Tony Clever Tony Clever is offline
Subscriber
 
Join Date: Jul 2015
Location: Fort Loudon, Pennsylvania, USA
Posts: 114
Thanks: 124
Thanked 92 Times in 41 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Color is not an issue, have the 3 little bolt holes for the plate to bolt the cover to is. You can see the one at eBay http://www.ebay.com/itm/140-0804-AIR...item4843e587f9 but it has the big hole in the front.

I am going to try and see if Green Mountain has a price on the part since you said it was off a military unit. https://greenmountaingenerators.com/...ep002a-mep003/
Not sure if I can get a price there or not but hate to offer something unless I have a good idea what is fair. Maybe someone else may know and can chime in. THanks

Last edited by Tony Clever; 09-07-2016 at 02:18:50 PM.
Reply With Quote
  #53  
Old 09-07-2016, 02:53:31 PM
yellowlister yellowlister is offline
Subscriber
 
Join Date: Feb 2010
Location: Granada Hills, California
Posts: 3,553
Thanks: 1,433
Thanked 1,659 Times in 1,106 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

It's the same.. has some corrosion in it.. genny came from flordia and is locked up.

Judging by Green Mountain prices for other things im.sure it will be a shock
Attached Thumbnails
Click image for larger version

Name:	20160907_115113.jpg
Views:	35
Size:	137.0 KB
ID:	262279   Click image for larger version

Name:	20160907_115125.jpg
Views:	35
Size:	131.4 KB
ID:	262280  
Reply With Quote
  #54  
Old 09-07-2016, 03:01:47 PM
Tony Clever Tony Clever is offline
Subscriber
 
Join Date: Jul 2015
Location: Fort Loudon, Pennsylvania, USA
Posts: 114
Thanks: 124
Thanked 92 Times in 41 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Green Mountain does not have one that I can find listed on their site. I know Green Mountain is high but just tying to find a figure that is fair to you. Yes it looks exactly the same as mine that is broken.
Reply With Quote
  #55  
Old 09-07-2016, 03:09:28 PM
nothingbutdarts nothingbutdarts is offline
Sponsor
 
Join Date: Apr 2014
Location: Bailey, Colorado, USA
Posts: 1,693
Thanks: 3,639
Thanked 649 Times in 464 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Joe is very reasonable on his pricing!!!! I have bought many items from him!
Reply With Quote
The Following 2 Users Say Thank You to nothingbutdarts For This Post:
  #56  
Old 09-07-2016, 03:20:23 PM
yellowlister yellowlister is offline
Subscriber
 
Join Date: Feb 2010
Location: Granada Hills, California
Posts: 3,553
Thanks: 1,433
Thanked 1,659 Times in 1,106 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Quote:
Originally Posted by nothingbutdarts View Post
Joe, you don't have a muffler for a 6.5NH that bolts onto the top of the engine?

is this what your looking for? not a bad price considering shipping would cost you at least 35 bucks..

http://www.ebay.com/itm/Toro-616-Z-Z...QAAOSwuAVWu6zt
Reply With Quote
  #57  
Old 09-07-2016, 07:14:05 PM
yellowlister yellowlister is offline
Subscriber
 
Join Date: Feb 2010
Location: Granada Hills, California
Posts: 3,553
Thanks: 1,433
Thanked 1,659 Times in 1,106 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

I have a onan dje shut off solenoid 12vdc. tested works good.. also have one for a djc djb..

Here is the governor control bracket with adjustment nut and spring for the cck..

Data plate for a 120 240 v 12.5 kw jc yd gen end..
Attached Thumbnails
Click image for larger version

Name:	20160907_152017.jpg
Views:	36
Size:	147.5 KB
ID:	262340   Click image for larger version

Name:	20160907_150330.jpg
Views:	35
Size:	146.4 KB
ID:	262341   Click image for larger version

Name:	20160907_162437.jpg
Views:	34
Size:	96.7 KB
ID:	262342   Click image for larger version

Name:	20160907_161813.jpg
Views:	37
Size:	103.0 KB
ID:	262343  


Last edited by yellowlister; 09-07-2016 at 07:27:25 PM.
Reply With Quote
  #58  
Old 09-07-2016, 11:12:55 PM
yellowlister yellowlister is offline
Subscriber
 
Join Date: Feb 2010
Location: Granada Hills, California
Posts: 3,553
Thanks: 1,433
Thanked 1,659 Times in 1,106 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

More dje parts.. air cleaner and intake are gone.. no rubber feet or cooling door or oil pressure switch or gauge..

Everything else is up for grabs.. 3 presto lite starters that need to be serviced.. I can have them rebuilt for 65 a peice if needed.. complete control box with yd regulator
. No cut or missing wires.. engine is locked up.. two.complete 6.0 yd generator ends, two exhaust manifolds and two heads, one from a djb, complete dje head is missing one injector.. cheap cheap cheap

Also have the shut off solenoid tested works good..
Attached Thumbnails
Click image for larger version

Name:	20160907_200214.jpg
Views:	33
Size:	122.0 KB
ID:	262362   Click image for larger version

Name:	20160907_200227.jpg
Views:	32
Size:	95.0 KB
ID:	262363   Click image for larger version

Name:	20160907_200232.jpg
Views:	32
Size:	126.0 KB
ID:	262364   Click image for larger version

Name:	20160907_200242.jpg
Views:	32
Size:	128.9 KB
ID:	262365  

Reply With Quote
  #59  
Old 09-08-2016, 12:45:02 PM
gustavus gustavus is offline
Registered
 
Join Date: May 2011
Location: Brandon, MB, Canada
Posts: 8
Thanks: 1
Thanked 3 Times in 1 Post
Default Parting out Onan Genset 3CK-1R

Block. pistons, connecting rods, block, oil pan, camshaft, carburetor, air cleaner all assosiated duct work, armature and field coils.

This ran with a shiot of gasoline down the carb and generator powered up a drill.

Onan Genset 3CK-1R
Reply With Quote
  #60  
Old 09-08-2016, 11:09:10 PM
SpencerPearson SpencerPearson is offline
Registered
 
Join Date: Sep 2016
Location: Magee, Mississippi (Simpson County)
Posts: 19
Thanks: 0
Thanked 5 Times in 1 Post
Smile Re: Onan Parting Out Thread (Used Onan Parts only!)

I acquired a onan gen and has no generator on the back. What is a good running engine and have a set of spare point. Also have the shroud for the front end but it's electric start through the generator I have the start panel and some of the wiring that goes to the Box. It's still sitting on the sheet metal with the rubber mounts under it in the Breather on it. This is the older generation and I want to say it's a 4.0. I can take pictures tomorrow if you would if anybody is interested in it it does run I just have no use for it I am working on a hit and miss engine and it's just sitting here out of the weather taking up space I have an extra set of points with the condenser plate to go with it the whole thing is up for grabs. I would do more on Trading then I would on selling and I don't have the funding to ship it. Ready and willing to help you any way I can.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

F o r u m Jump

Similar Threads Chosen at Random
Thread Thread Starter F o r u m Replies Last Post
Onan 12.0 DJC parts tim berkemeier Onan Generators 3 09-21-2011 09:11:12 PM
Onan parts Karl Onan Generators 1 04-17-2008 10:22:27 AM
Online Onan Parts Sales-or at least a parts number B.Ikard Onan Generators 3 06-21-2007 07:07:12 AM
Onan cck parts JDavid Onan Generators 1 03-14-2007 10:17:16 AM
Parting out engines thread Handlebar99 Antique Gas Engine Discussion 19 03-27-2006 09:44:37 PM


Use "Ctrl" mouse wheel to change screen size.
All times are GMT -4. The time now is 09:59:05 AM.

Smokstak and Enginads site search!


All use is subject to our TERMS OF SERVICE
SMOKSTAK® is a Registered Trade Mark - A Community of Antique Engine Enthusiasts
Copyright © 2000 - 2016 by Harry Matthews P.O. Box 5612 - Sarasota, FL 34277