Generators and Motors
[Home] - [HELP] - [Forums] - [Library] - [Photo Gallery] - [Groups] - [Classified Ads] - [Subscribe] - [Links] - [Books] - [Sponsors] -

Go Back   SmokStak > SmokStak® Vintage Electrical Equipment > Generators & Motors General Discussion > Onan Generators
Forgot Password? Join Us!

Notices

Onan Generators Restoring, operating and maintaining vintage Onan generators.

Onan Generators

Onan Parting Out Thread (Used Onan Parts only!)


this thread has 474 replies and has been viewed 30736 times

Reply
 
Thread Tools Display Modes
  #421  
Old 08-12-2017, 11:19:04 AM
yellowlister yellowlister is offline
Subscriber
 
Join Date: Feb 2010
Location: Granada Hills, California
Posts: 3,896
Thanks: 1,792
Thanked 1,911 Times in 1,250 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

More parts.. jc cooling door and top cylinder head tin, dje exhaust louver, jc vac u flow exhaust side tins

Jc jb and dje cylinder heads and push rods

Oil pressure gauges and switches for j series, j series dipstick. Jc camshaft and crankshaft

Magniciter, djb cylinder head intake with preheater, cck jb djb, jc djc oil pans.

Jc centrifugal switch, dje syntrifical switch

Control boxes.. j series
Attached Thumbnails
Click image for larger version

Name:	20170811_130524.jpg
Views:	49
Size:	108.2 KB
ID:	288395   Click image for larger version

Name:	20170811_130558.jpg
Views:	54
Size:	206.5 KB
ID:	288396   Click image for larger version

Name:	20170811_130752.jpg
Views:	51
Size:	123.4 KB
ID:	288397   Click image for larger version

Name:	20170811_130636.jpg
Views:	58
Size:	130.1 KB
ID:	288398  


Last edited by yellowlister; 08-12-2017 at 11:48:05 AM.
Reply With Quote
Sponsored Links
  #422  
Old 08-12-2017, 11:43:01 AM
yellowlister yellowlister is offline
Subscriber
 
Join Date: Feb 2010
Location: Granada Hills, California
Posts: 3,896
Thanks: 1,792
Thanked 1,911 Times in 1,250 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Djb shut off solenoid

Cck points tower.

Cck and jc jb vac u flow flywheels
Attached Thumbnails
Click image for larger version

Name:	20170719_135851.jpg
Views:	31
Size:	94.9 KB
ID:	288399   Click image for larger version

Name:	20170719_135704.jpg
Views:	34
Size:	154.9 KB
ID:	288400   Click image for larger version

Name:	20170811_184205.jpg
Views:	33
Size:	152.1 KB
ID:	288401   Click image for larger version

Name:	20170811_130905.jpg
Views:	35
Size:	127.6 KB
ID:	288402  

Reply With Quote
  #423  
Old 08-12-2017, 02:03:29 PM
nothingbutdarts nothingbutdarts is offline
Sponsor
 
Join Date: Apr 2014
Location: Bailey, Colorado, USA
Posts: 2,115
Thanks: 4,660
Thanked 932 Times in 631 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Any JB complete working louvers?
Reply With Quote
  #424  
Old 08-12-2017, 03:27:13 PM
yellowlister yellowlister is offline
Subscriber
 
Join Date: Feb 2010
Location: Granada Hills, California
Posts: 3,896
Thanks: 1,792
Thanked 1,911 Times in 1,250 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Quote:
Originally Posted by nothingbutdarts View Post
Any JB complete working louvers?

I'm almost positive the djb dje and jb louvers are the same.. Someone correct me if I'm wrong please..

Here is what I have kim, two oil pressure gauges and switches, the louvers from a dje that are temperature controlled and I'll send you a complete set or rockers push rods and tubes as I have 6 or so sets..

And a control box from a magniciter jc that has the cranking limiter.
Attached Thumbnails
Click image for larger version

Name:	20170812_122014.jpg
Views:	39
Size:	141.7 KB
ID:	288420   Click image for larger version

Name:	20170812_122007.jpg
Views:	40
Size:	167.3 KB
ID:	288421   Click image for larger version

Name:	20170812_121450.jpg
Views:	45
Size:	138.3 KB
ID:	288422   Click image for larger version

Name:	20170812_122614.jpg
Views:	46
Size:	165.2 KB
ID:	288423  

Reply With Quote
  #425  
Old 08-12-2017, 03:38:05 PM
yellowlister yellowlister is offline
Subscriber
 
Join Date: Feb 2010
Location: Granada Hills, California
Posts: 3,896
Thanks: 1,792
Thanked 1,911 Times in 1,250 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

I have some bf bfa parts.. generator end cover, also fits the nh, the control box mount, and the exhaust down tube cover.

Dje generator end cover, 2 magniciter generator end covers, djb dje pressure cooled cylinder head tins covers, shut off solenoid tin for dje and djb,

exhaust side jb vac u flow cylinder tin covers,

pressure cooled jb bottom side exhaust tin,

dje fan cover, jc fan cover,

jc cylinder head tin, jc pressure cooled cylinder head tin,

Jc vac u flow exhaust side tins, 3 in, dje, fan covers

Jc vac u flow fan

Jc djc oil pans jb,jc,djb,djc engine to generate bell housing.

Cck oil pan. Cck vac u flow cooling tins
Attached Thumbnails
Click image for larger version

Name:	20170812_121421.jpg
Views:	44
Size:	196.8 KB
ID:	288432   Click image for larger version

Name:	20170812_121302.jpg
Views:	44
Size:	134.9 KB
ID:	288433   Click image for larger version

Name:	20170812_121249.jpg
Views:	44
Size:	183.0 KB
ID:	288434   Click image for larger version

Name:	20170812_121238.jpg
Views:	52
Size:	206.2 KB
ID:	288435  

Reply With Quote
  #426  
Old 08-12-2017, 03:42:21 PM
yellowlister yellowlister is offline
Subscriber
 
Join Date: Feb 2010
Location: Granada Hills, California
Posts: 3,896
Thanks: 1,792
Thanked 1,911 Times in 1,250 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Few more pictures .. 3rd picture is a jc crankshaft
Attached Thumbnails
Click image for larger version

Name:	20170812_121140.jpg
Views:	48
Size:	283.4 KB
ID:	288436   Click image for larger version

Name:	20170812_123909.jpg
Views:	48
Size:	154.1 KB
ID:	288437   Click image for larger version

Name:	20170812_123934.jpg
Views:	46
Size:	132.6 KB
ID:	288438   Click image for larger version

Name:	20170812_123906.jpg
Views:	48
Size:	162.8 KB
ID:	288439  

Reply With Quote
  #427  
Old 08-13-2017, 10:31:50 PM
JohnnyC JohnnyC is offline
Subscriber
 
Join Date: Jun 2014
Location: Boonton, New Jersey
Posts: 3,833
Thanks: 1,075
Thanked 1,741 Times in 1,031 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

***** To Yellowlister (Joe) - As you requested - Big Boy Fooken Meters.

What ever Joe does not need/want will go to anyone here that would like one or more of these meters. They will go great with an Onan 2.5 LK

https://www.youtube.com/watch?v=IAsC...ature=youtu.be


JohnnyC
New Jersey
Reply With Quote
The Following 2 Users Say Thank You to JohnnyC For This Post:
  #428  
Old 08-19-2017, 10:41:58 AM
yellowlister yellowlister is offline
Subscriber
 
Join Date: Feb 2010
Location: Granada Hills, California
Posts: 3,896
Thanks: 1,792
Thanked 1,911 Times in 1,250 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Anyone need a jb, djb, dje exhaust manifold? Or shut off solenoid for a djb?

Points box is sold.. edit.. solenoid is sold
Attached Thumbnails
Click image for larger version

Name:	20170818_134801.jpg
Views:	40
Size:	104.9 KB
ID:	288987   Click image for larger version

Name:	20170818_134841.jpg
Views:	34
Size:	105.3 KB
ID:	288988  

Last edited by yellowlister; 08-19-2017 at 11:26:07 AM.
Reply With Quote
  #429  
Old 08-19-2017, 11:49:06 AM
Wayne 440 Wayne 440 is offline
Registered-III
 
Join Date: Nov 2004
Location: Kentucky
Posts: 5,132
Thanks: 303
Thanked 4,211 Times in 2,015 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Arrrgh. That frequency meter is something I have zero need for, but much desire for.
Reply With Quote
  #430  
Old 08-19-2017, 01:05:30 PM
nothingbutdarts nothingbutdarts is offline
Sponsor
 
Join Date: Apr 2014
Location: Bailey, Colorado, USA
Posts: 2,115
Thanks: 4,660
Thanked 932 Times in 631 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Come on, just bite the bullit!
Reply With Quote
  #431  
Old 08-19-2017, 01:27:50 PM
yellowlister yellowlister is offline
Subscriber
 
Join Date: Feb 2010
Location: Granada Hills, California
Posts: 3,896
Thanks: 1,792
Thanked 1,911 Times in 1,250 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Frequency meter is on its way to me already sorry!
Reply With Quote
  #432  
Old 08-19-2017, 02:14:06 PM
JohnnyC JohnnyC is offline
Subscriber
 
Join Date: Jun 2014
Location: Boonton, New Jersey
Posts: 3,833
Thanks: 1,075
Thanked 1,741 Times in 1,031 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Yellowlister, I received the CTs today. Thanks a bunch. Yes, the Frequency meter is somewhere between you and me in transit. I did not check the tracking number today since I had to be at work by 6 a.m. and got home a short while ago and must head out to a BBQ with the boss now. Let me know if the tracking number in the picture I sent you is not readable and I will send it to you in a text or PM later this evening. Also, I took more pictures of the big fooken meters that I will post here either tonight or tomorrow at the latest. Time permitting on Sunday, I will inventory the small meters and post here. I did not forget about the controller for you that will be sent sometime this coming week along with any other meters that you might select.

Ok, got to run now to a BBQ. I am in charge of the fire pit (we cook over firewood for the best taste)

JohnnyC
New Jersey
Reply With Quote
The Following User Says Thank You to JohnnyC For This Post:
  #433  
Old 08-20-2017, 09:03:07 AM
JohnnyC JohnnyC is offline
Subscriber
 
Join Date: Jun 2014
Location: Boonton, New Jersey
Posts: 3,833
Thanks: 1,075
Thanked 1,741 Times in 1,031 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

The big meters that I have are pictured below. I did not put them on Ebay or CL yet. They are all NOS with the exception of one meter.

For the youtube video version of each meter use the following link. The Frequency meter is no longer here and is on its way to Joe. Nice meter too!

https://www.youtube.com/watch?v=IAsCYR2JoI0


In my last response I mentioned that I may inventory and post the details on my smaller meters today (sunday). Not sure if that will happen. I got lots of house chores to do today and don't feel like doing any of them...

JohnnyC
New Jersey
Attached Thumbnails
Click image for larger version

Name:	001.jpg
Views:	39
Size:	139.0 KB
ID:	289048   Click image for larger version

Name:	002.jpg
Views:	35
Size:	142.2 KB
ID:	289049   Click image for larger version

Name:	003.jpg
Views:	29
Size:	133.0 KB
ID:	289050  
Reply With Quote
  #434  
Old 08-20-2017, 07:45:42 PM
Imaybail Imaybail is offline
Registered-I
 
Join Date: Mar 2016
Location: Woodstock, Georgia
Posts: 73
Thanks: 70
Thanked 18 Times in 7 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Do these amp meters need cts?
Reply With Quote
  #435  
Old 08-21-2017, 01:07:41 PM
JohnnyC JohnnyC is offline
Subscriber
 
Join Date: Jun 2014
Location: Boonton, New Jersey
Posts: 3,833
Thanks: 1,075
Thanked 1,741 Times in 1,031 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Quote:
Originally Posted by Imaybail View Post
Do these amp meters need cts?
Yes, they require a CTs.

JohnnyC
New Jersey
Reply With Quote
  #436  
Old 08-21-2017, 02:34:02 PM
Billy J Shafer's Avatar
Billy J Shafer Billy J Shafer is offline
Subscriber
 
Join Date: Nov 2004
Location: Centerville, Texas
Posts: 16,218
Thanks: 8,263
Thanked 13,552 Times in 6,384 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Quote:
Originally Posted by JohnnyC View Post
Any 4.0 BFA tins???? I need vacuflow tins and both cylinder cover tins. Also need exhaust manifold.

Thx
JohnnyC
New Jersey
I have the head covers. If you mean the front cover for the air exhaust. I have it also.
__________________
I don't talk to myself. This early in the morning. Why the hell should I talk to you.
Reply With Quote
  #437  
Old 08-26-2017, 04:52:02 PM
JohnnyC JohnnyC is offline
Subscriber
 
Join Date: Jun 2014
Location: Boonton, New Jersey
Posts: 3,833
Thanks: 1,075
Thanked 1,741 Times in 1,031 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

This weekend I finally have time to continue sorting out the meters I got from my nephew. I already sold several of the large 4" professional console mounted meters and several more on hold for Joe and Dan. What I have left over can be seen in the first attached picture, however I there is a forum member that is interested in possibly all the meters that are not yet claimed both big and small meters. Regardless, I am posting what I currently have left of the BIG meters as seen in the first picture.

** Update - As I am typing this posting, I think I have another case of large meters kicked off to the side in my garage unaccounted for. If so, I will update this post, but for now what you see in the first picture is what I have left over of the big meters.

The second and third pictures are Onan meters from my LT II ATS (not part of the meters I got from my nephew). They work, but I removed them to install a Gencon II Pro controller in place of the meters. If interested I will let all three go for a grand total of $5.00 cash plus shipping. I want to avoid PayPal since they take a chunk of change. I will go using the honor system - I send you the meters and you send me a check in return.

JohnnyC
New Jersey
Attached Thumbnails
Click image for larger version

Name:	001.jpg
Views:	14
Size:	184.7 KB
ID:	289460   Click image for larger version

Name:	002.jpg
Views:	13
Size:	134.9 KB
ID:	289461   Click image for larger version

Name:	003.jpg
Views:	11
Size:	105.1 KB
ID:	289462  
Reply With Quote
  #438  
Old 08-26-2017, 05:17:52 PM
PnishrPW PnishrPW is offline
Registered-II
 
Join Date: May 2012
Location: Western Washington
Posts: 662
Thanks: 441
Thanked 216 Times in 154 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Johnny, I'll take the 3 out of your xfer switch. Thx!
Reply With Quote
  #439  
Old 08-26-2017, 05:31:11 PM
JohnnyC JohnnyC is offline
Subscriber
 
Join Date: Jun 2014
Location: Boonton, New Jersey
Posts: 3,833
Thanks: 1,075
Thanked 1,741 Times in 1,031 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

Quote:
Originally Posted by PnishrPW View Post
Johnny, I'll take the 3 out of your xfer switch. Thx!
OK, I will put them with the other meters you reserved last week. I will send one big-ish box rather than a bunch of small boxes to save on shipping.

JohnnyC
New Jersey
Reply With Quote
  #440  
Old 08-26-2017, 05:39:13 PM
JohnnyC JohnnyC is offline
Subscriber
 
Join Date: Jun 2014
Location: Boonton, New Jersey
Posts: 3,833
Thanks: 1,075
Thanked 1,741 Times in 1,031 Posts
Default Re: Onan Parting Out Thread (Used Onan Parts only!)

In the boxes of crap,,,, errr I mean gold,,, I encountered something totally useless to me, but may have significant value to someone that can use them. They are new in the box BUSS non150 fuses. I got three and tested each fuse on my Fluke. When I Googled them online I was shocked to find that each fuse goes for $65 EACH. I will dump all 3 for a grand total of $25 cash (or $26 if paid through PayPal since they will rob me about 3% for their service) plus shipping. That is a savings of $170 to the person that can use them.

If I can sell these fuses here, I will donate the $25 to this site

JohnnyC
New Jersey
Attached Thumbnails
Click image for larger version

Name:	001.jpg
Views:	19
Size:	203.0 KB
ID:	289467   Click image for larger version

Name:	003.jpg
Views:	14
Size:	161.1 KB
ID:	289468   Click image for larger version

Name:	002.jpg
Views:	16
Size:	72.3 KB
ID:	289469  
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

F o r u m Jump

Similar Threads Chosen at Random
Thread Thread Starter F o r u m Replies Last Post
Onan 12.0 DJC parts tim berkemeier Onan Generators 3 09-21-2011 09:11:12 PM
Onan parts Karl Onan Generators 1 04-17-2008 10:22:27 AM
Online Onan Parts Sales-or at least a parts number B.Ikard Onan Generators 3 06-21-2007 07:07:12 AM
Onan cck parts JDavid Onan Generators 1 03-14-2007 10:17:16 AM
Parting out engines thread Handlebar99 Antique Gas Engine Discussion 19 03-27-2006 09:44:37 PM


Use "Ctrl" mouse wheel to change screen size.
All times are GMT -4. The time now is 10:50:57 AM.

Smokstak and Enginads site search!


All use is subject to our TERMS OF SERVICE
SMOKSTAK® is a Registered Trade Mark - A Community of Antique Engine Enthusiasts
Copyright © 2000 - 2016 by Harry Matthews P.O. Box 5612 - Sarasota, FL 34277