Antique Engines and Old Iron
[Home] - [HELP] - [Forums] - [Library] - [Photo Gallery] - [Groups] - [Classified Ads] - [Subscribe] - [Links] - [Books] - [Sponsors] -

Go Back   SmokStak > SmokStak® Antique Engine Community > Antique Gas Engine Discussion > Antique Engine Archives
Forgot Password? Join Us!

Notices

Antique Engine Archives All archived posts from 1999 to 2004 when SmokStak was on EnginAds. This is a read-only board.

Antique Engine Archives

Stover CT-1 Governor Assembly


this thread has 1 replies and has been viewed 1995 times

 
 
Thread Tools Display Modes
  #1  
Old 05-29-2003, 10:55:56 AM
Jim H.
Guest
 
Posts: n/a
Default Stover CT-1 Governor Assembly

I am working on bringing a CT-1 back from the dead and have stripped the engine into its components except for the governor assembly. As a relative newbie, I have no familiarity at all with how the governor and its weights and springs go together, much less come apart. Is anyone familiar with the CT's governor that could tell me how to take it apart (without using a hacksaw and a large hammer, both of which I am quite familiar!) so that I don't damage the springs or shaft or gear or ........... Thanks for any response and help.
Sponsored Links
  #2  
Old 05-29-2003, 08:18:11 PM
Ed Deis
Guest
 
Posts: n/a
Default Re: Stover CT-1 Governor Assembly

Nothing to it. The gear screws off the shaft and simply removing a couple of cotter keys in the weight pins and it's apart. Believe this shaft and gear has left hand threads. If noone else confirms this call me and I'll double check. I can't get over how much I can forget any more. Ed
 

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

F o r u m Jump

Similar Threads Chosen at Random
Thread Thread Starter F o r u m Replies Last Post
Stover CT-2 Governor Question CODY K Antique Gas Engine Discussion 0 02-12-2007 01:52:36 AM
1 1/2 hp Stover K Governor pics John in Maryland Antique Gas Engine Discussion 2 10-23-2006 07:51:34 AM
Stover KA2 Governor Shaft Disassembly ? SteveJ Antique Gas Engine Discussion 0 04-30-2006 10:26:57 PM
stover governor setup KyleBlankenship Antique Gas Engine Discussion 0 02-19-2005 10:50:05 AM
Saw Assembly Tim Claremont Antique Engine Archives 0 07-19-2002 10:38:41 AM


Use "Ctrl" mouse wheel to change screen size.
All times are GMT -4. The time now is 06:56:50 AM.

Smokstak and Enginads site search!


All use is subject to our TERMS OF SERVICE
SMOKSTAK® is a Registered Trade Mark - A Community of Antique Engine Enthusiasts
Copyright © 2000 - 2016 by Harry Matthews P.O. Box 5612 - Sarasota, FL 34277