Antique Tractors
[Home] - [HELP] - [Forums] - [Library] - [Photo Gallery] - [Groups] - [Classified Ads] - [Subscribe] - [Links] - [Books] - [Sponsors] -

Go Back   SmokStak > SmokStak® Old Iron and Tractor Community > Antique Steel Wheel Tractors - Old Iron Lugs and Cleats
Forgot Password? Join Us!

Notices

Antique Steel Wheel Tractors - Old Iron Lugs and Cleats Photos and information about antique steel wheeled farm tractors. This is where to find the heaviest of Old Iron tractors.

Antique Steel Wheel Tractors - Old Iron Lugs and Cleats

1/4 scale 8/16 MOGUL made by IHC


this thread has 30 replies and has been viewed 10779 times

Reply
 
Thread Tools Display Modes
  #11  
Old 11-21-2005, 09:48:46 PM
Kelly Tytlandsvik Kelly Tytlandsvik is offline
Subscriber
 
Join Date: Aug 2005
Location: Estevan, Saskatchewan Canada
Posts: 1,121
Thanks: 219
Thanked 3,517 Times in 446 Posts
Images: 407
Default Re: 1/4 scale 8/16 MOGUL made by IHC

Quote:
Originally Posted by smtwins
Thought I would post a picture of my 1/6th scale Type C Mogul. This is a fully functional model including friction reverse.

I haven't seen this tractor in a few years. Looks like a Bill Winteringham Model. Am I right? Bill was a very prolific builder from Estevan Saskatchewan who was active building models right up to the time of his death at the age of 91.

Kelly T
Reply With Quote
Sponsored Links
  #12  
Old 11-21-2005, 11:41:23 PM
smtwins smtwins is offline
Subscriber
 
Join Date: Nov 2004
Location: Sedalia, Missouri USA
Posts: 316
Thanks: 303
Thanked 557 Times in 93 Posts
Thumbs up Re: 1/4 scale 8/16 MOGUL made by IHC

Kelly you are correct. Bill did build this model. What other models did he build, this one was built in 1984. Thanks Mike
Reply With Quote
  #13  
Old 11-22-2005, 08:30:22 PM
Kelly Tytlandsvik Kelly Tytlandsvik is offline
Subscriber
 
Join Date: Aug 2005
Location: Estevan, Saskatchewan Canada
Posts: 1,121
Thanks: 219
Thanked 3,517 Times in 446 Posts
Images: 407
Default Re: 1/4 scale 8/16 MOGUL made by IHC

Bill had built many models. Gas Tractor models......Fairbanks Morse, at least two Moguls, a Minneapolis universal, 20-40 case and I believe nine Case steam engines. He also built many gas engines and a threshing machines. He was a great guy and was always willing to help out a newcomer to model building.

Kelly T
Reply With Quote
  #14  
Old 11-26-2005, 12:04:58 PM
JBoogie's Avatar
JBoogie JBoogie is offline
Registered-III
 
Join Date: Jun 2005
Location: Toledo, Ohio USA
Posts: 2,031
Thanks: 1,842
Thanked 1,404 Times in 476 Posts
Images: 241
Default Re: 1/4 scale 8/16 MOGUL made by IHC

all of this model talk reminded me that this year the North American Model Engineering Society annual show will be held April 22-23 at the Seagate Center in my town, Toledo, Ohio! this is an excellent show and has out grown its previous venues. you will see everything from steam traction engines to gas tractors, motorcycles, gas engines, steam engines, marine, stationary, machine tools, farm machinery, and even complete scale automobiles!

search google for the N.A.M.E.S. website for more info.

hope to see ya there.
Reply With Quote
  #15  
Old 11-26-2005, 01:21:23 PM
ChadYelland's Avatar
ChadYelland ChadYelland is offline
Registered-III
 
Join Date: Nov 2004
Location: Saskatoon, Saskatchewan Canada
Posts: 601
Thanks: 11
Thanked 150 Times in 28 Posts
Default Re: 1/4 scale 8/16 MOGUL made by IHC

I have a 1/6 scale case 65hp steam engine of Bills, i'm sad i never got to meet him. but what i would like to do is build a working model of a Titan type D 45hp that my great grandpa had, i have a nice pair of 18inch flywheels that are simular style, his original one is in a museum 6 hr drive from here, i have some pictures but i can't find my measurements, anyone know of a simular model with the 2cyl engine?
Reply With Quote
  #16  
Old 11-26-2005, 11:21:44 PM
Kelly Tytlandsvik Kelly Tytlandsvik is offline
Subscriber
 
Join Date: Aug 2005
Location: Estevan, Saskatchewan Canada
Posts: 1,121
Thanks: 219
Thanked 3,517 Times in 446 Posts
Images: 407
Default Re: 1/4 scale 8/16 MOGUL made by IHC

If you fellas would like to check out the model show here in Estevan you can do so by clicking on the link below.

http://users.accesscomm.ca/emes/index.html

We just had our 18th annual show this past October with over 300 models on display. Gas tractors are usually a scarce commodity but they are out there. If you check out the site you will find a couple of nice tractor models......an Economy tractor as well as a very nice D John Deere, as well as many other very interesting models. These photos are just a small sample of the engines at the show.

The Estevan show as well as the other large shows are an excellent place to see some beautifuly built models. As well as an excellent place to meet some wonderful people that will be more than willing to help out anyone wanting to get started building models.

Kelly Tytlandsvik
Organizer, Estevan Model Engineering Show
Reply With Quote
  #17  
Old 11-27-2005, 11:35:21 AM
Guy Fay Guy Fay is offline
Registered-III
 
Join Date: Dec 2004
Location: Madison, Wisconsin USA
Posts: 542
Thanks: 329
Thanked 804 Times in 251 Posts
Default Re: 1/4 scale 8/16 MOGUL made by IHC

Quote:
Originally Posted by ChadYelland
I have a 1/6 scale case 65hp steam engine of Bills, i'm sad i never got to meet him. but what i would like to do is build a working model of a Titan type D 45hp that my great grandpa had, i have a nice pair of 18inch flywheels that are simular style, his original one is in a museum 6 hr drive from here, i have some pictures but i can't find my measurements, anyone know of a similar model with the 2cyl engine?
If you have parts numbers, you can e-mail them to Lee Grady at the Wisconsin Historical Society and he'll send you back the IH engineering drawings if they have them. Main problem is that not all of the parts appear in the parts catalogs! Only about half do. I helped out an Austrailian guy missing the platform off his Titan. Had to go in and search drawing by drawing.....

Last edited by Craig A; 11-27-2005 at 03:30:16 PM. Reason: repair tags
Reply With Quote
  #18  
Old 11-29-2005, 11:03:03 PM
Alastair Geddes. Alastair Geddes. is online now
Registered-III
 
Join Date: Dec 2004
Location: Australia
Posts: 1,012
Thanks: 3
Thanked 873 Times in 401 Posts
Default Re: 1/4 scale 8/16 MOGUL made by IHC

That Australian guy was me, very fortunate to get those drawings i can tell you! some reason why i do not know the platform was gone probally made up nice strainer posts during the war when steel was at a premium i think but i am guessing.

Major parts have been sand blasted and etch primed so the only way now is up cannot pull it appart any further! can only put parts on.
12 + hours to blast chassis/wheels/engine bed/gears/cylinder still have guards to do (mud and gear guards)

whole job to blast all parts inc bolts would be 25 hours approx, could be even 30 hours not including loading/transport or disassembly time or hot tanking to remove grease.

So anyone out there wanting to do similiar take that as a conservative estimate, just for cleaning.

Thank you Guy for the info!
Reply With Quote
  #19  
Old 11-23-2006, 09:28:17 AM
John Hall John Hall is offline
Registered-II
 
Join Date: Oct 2006
Location: Bahama, North Carolina, USA
Posts: 52
Thanks: 1
Thanked 6 Times in 4 Posts
Default Re: 1/4 scale 8/16 MOGUL made by IHC

Very interesting model. If anyone wants to see other IH built models, go by the Cyrus McCormick farm in Virginia. They have scale model reapers and binders on display. I am pretty certain all were made by IH.
Reply With Quote
  #20  
Old 01-25-2008, 09:23:30 PM
smtwins smtwins is offline
Subscriber
 
Join Date: Nov 2004
Location: Sedalia, Missouri USA
Posts: 316
Thanks: 303
Thanked 557 Times in 93 Posts
Default Re: 1/4 scale 8/16 MOGUL made by IHC

Where does time go! It has been over 2 years since this thread was started. Wanted to bring it to the top so Kelly would post his Fairbanks here and also the National Model Show will be in Adrian MO this year, this might spark some interest.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

F o r u m Jump

Similar Threads Chosen at Random
Thread Thread Starter F o r u m Replies Last Post
1/2 scale 1/3 scale steam engine Dale Steam Stationary Engines, Traction Engines, Steam Boats 5 10-16-2006 10:06:03 AM
1/2 scale Kitten Steam engine/1/4 scale case KG1584 Steam Stationary Engines, Traction Engines, Steam Boats 9 07-21-2006 12:21:43 AM
What the difference between a Mogul and Mogul Jr?? Adam Cottrill Antique Engine Archives 2 12-31-2002 09:47:36 PM
Who made it??? Steve Barr Antique Engine Archives 5 11-02-2002 10:49:16 PM
JD How many were made? Dave Antique Engine Archives 0 08-19-2002 10:04:13 AM


Use "Ctrl" mouse wheel to change screen size.
All times are GMT -4. The time now is 04:48:51 AM.

Smokstak and Enginads site search!


All use is subject to our TERMS OF SERVICE
SMOKSTAK® is a Registered Trade Mark - A Community of Antique Engine Enthusiasts
Copyright © 2000 - 2016 by Harry Matthews P.O. Box 5612 - Sarasota, FL 34277