Antique Engines and Old Iron
[Home] - [HELP] - [Forums] - [Groups] - [Classified Ads] - [Subscribe] - [Books] - [Sponsors] -

Go Back   SmokStak > SmokStak® General Off Topic Discussion > Smokstak Down Under
Forgot Password? Join Us!

Notices

Smokstak Down Under For Australia and New Zealand Smokstakers to meet, greet, yabber and yack.

Smokstak Down Under

HELP. Parts For 1923 Dodge Needed


this thread has 35 replies and has been viewed 1841 times

Reply
 
Thread Tools Display Modes
  #21  
Old 05-31-2019, 05:28:16 PM
Scotty 2 Scotty 2 is offline
Registered
 
Join Date: Mar 2011
Location: Warwick, Queensland, Australia
Posts: 2,927
Thanks: 1,967
Thanked 2,305 Times in 1,203 Posts
Default Re: HELP. Parts For 1923 Dodge Needed

Quote:
Originally Posted by Ray Freeman View Post
Just out of interest a few weeks back I modified some felt seal carriers to take standard lip seals. They were for a vintage truck,rear axle I believe.
Hello all
I thought of that and it would be simple to do except for the seal in the front of the pump. But if the felts can be had it would save time and retain originality. Originality isn't so important as no-one would ever see them but the time factor is important. Time is fairly precious for me at the moment.
Cheers Scott
Reply With Quote
Sponsored Links
  #22  
Old 06-03-2019, 05:35:56 AM
Rob.S Rob.S is offline
Registered
 
Join Date: Sep 2009
Location: Molong, New South Wales, Australia
Posts: 411
Thanks: 764
Thanked 501 Times in 204 Posts
Default Re: HELP. Parts For 1923 Dodge Needed

Scotty you could also try old world lamps and tyres in Mudgee
Reply With Quote
The Following User Says Thank You to Rob.S For This Post:
  #23  
Old 06-03-2019, 04:58:03 PM
Scotty 2 Scotty 2 is offline
Registered
 
Join Date: Mar 2011
Location: Warwick, Queensland, Australia
Posts: 2,927
Thanks: 1,967
Thanked 2,305 Times in 1,203 Posts
Default Re: HELP. Parts For 1923 Dodge Needed

Quote:
Originally Posted by Rob.S View Post
Scotty you could also try old world lamps and tyres in Mudgee
Now there's a combo made in heaven. Lamps and tyres. A bit like carpet cleaning and pest control
Thanks Rob. Brian (Justin's recommendation) is pretty crook at the moment. I have to ring back on Friday.

Cheers Scott
Reply With Quote
The Following User Says Thank You to Scotty 2 For This Post:
  #24  
Old 06-06-2019, 03:14:47 AM
Scotty 2 Scotty 2 is offline
Registered
 
Join Date: Mar 2011
Location: Warwick, Queensland, Australia
Posts: 2,927
Thanks: 1,967
Thanked 2,305 Times in 1,203 Posts
Default Re: HELP. Parts For 1923 Dodge Needed

Hello all
Got a price for tyres off Old World Lamps and Tyres and what a nice bloke to speak to and a pretty good website to look through. I looked and I shouldn't have. There's some beautiful cars there for sale. https://www.oldworldlamps.net/
Anyways...a set of 4 500-24 tyres delivered to Warwick comes in at $1,500. He's doing a deal seeing it's a museum getting the old car on the road.
Tomorrow I'll talk to old mate at Bribie and see.

Cheers Scott
Reply With Quote
The Following User Says Thank You to Scotty 2 For This Post:
  #25  
Old 06-12-2019, 02:16:11 AM
Scotty 2 Scotty 2 is offline
Registered
 
Join Date: Mar 2011
Location: Warwick, Queensland, Australia
Posts: 2,927
Thanks: 1,967
Thanked 2,305 Times in 1,203 Posts
Default Re: HELP. Parts For 1923 Dodge Needed

Hello all
I finally got some pictures of how the pump divides the power from the pump to the drive train. Just for you Cobba.
In this picture you'll see the in and out lever on the right hand side. Push the lever back and the selector fork engages the big gear which drives the pump.

All the pictures taken from the input side.





To get the power to the drive train the selector fork goes back which pushes the gear on the shaft into a coupling which drives the diff.
Below is the gear nearly ready to go into the coupling and the coupling itself. The diff goes on the other side of this coupling





All together ready to get the power to the diff



Pretty simple huh Cobba?

Cheers Scott
Reply With Quote
The Following 4 Users Say Thank You to Scotty 2 For This Post:
  #26  
Old 07-04-2019, 07:03:04 PM
Scotty 2 Scotty 2 is offline
Registered
 
Join Date: Mar 2011
Location: Warwick, Queensland, Australia
Posts: 2,927
Thanks: 1,967
Thanked 2,305 Times in 1,203 Posts
Default Re: HELP. Parts For 1923 Dodge Needed

Hello all
An update:
gearbox - done
pump - done
diff - All pulled apart. Gears OK, all bearings crook. Been busy trying to find them. 2-3 weeks so far
A chap in the Dodge Club in US is helping in solving the bearing problem.

Here is a story the local free paper wrote about the Dodge and it's history this week. Thanks Freetimes.
https://freetimes.com.au/news/2019-0...he-road-again/

Cheers Scott
Reply With Quote
The Following 2 Users Say Thank You to Scotty 2 For This Post:
  #27  
Old 07-05-2019, 07:54:22 AM
cobbadog cobbadog is offline
Registered
 
Join Date: Aug 2009
Location: Coopernook. N.S.W. Australia
Posts: 1,912
Thanks: 3,425
Thanked 852 Times in 572 Posts
Default Re: HELP. Parts For 1923 Dodge Needed

With that bit of wear showing it looks like they may have been in a hurry to engage it a few times.
Yep, it simple, like me!
Reply With Quote
The Following User Says Thank You to cobbadog For This Post:
  #28  
Old 07-05-2019, 08:39:23 AM
casertractor casertractor is offline
Subscriber
 
Join Date: Feb 2006
Location: Milton, Ontario, Canada
Posts: 5,433
Thanks: 26,411
Thanked 6,079 Times in 2,492 Posts
Default Re: HELP. Parts For 1923 Dodge Needed

www.myersearlydodge.com
Reply With Quote
The Following User Says Thank You to casertractor For This Post:
  #29  
Old 07-05-2019, 06:59:53 PM
Scotty 2 Scotty 2 is offline
Registered
 
Join Date: Mar 2011
Location: Warwick, Queensland, Australia
Posts: 2,927
Thanks: 1,967
Thanked 2,305 Times in 1,203 Posts
Default Re: HELP. Parts For 1923 Dodge Needed

Quote:
Originally Posted by casertractor View Post
Hello Mr Case
They're definitely on the contact lists. I found them looking for the exhaust pipe nut 4 cylinder. I just wished we were there or they were here. Another place I found here in Australia is Ray's Early Dodge Parts.
Finding parts in Australia is a consideration due to exchange rates and, more importantly, shipping costs.

Cheers Scott

---------- Post added at 08:59:53 AM ---------- Previous post was at 08:56:27 AM ----------

Quote:
Originally Posted by cobbadog View Post
With that bit of wear showing it looks like they may have been in a hurry to engage it a few times.
That's why that long lever is there apparently Cobba. Just pull harder until something gives.
Reply With Quote
The Following 2 Users Say Thank You to Scotty 2 For This Post:
  #30  
Old 07-06-2019, 07:32:56 AM
cobbadog cobbadog is offline
Registered
 
Join Date: Aug 2009
Location: Coopernook. N.S.W. Australia
Posts: 1,912
Thanks: 3,425
Thanked 852 Times in 572 Posts
Default Re: HELP. Parts For 1923 Dodge Needed

Hey Scotty, have you been to the H.V.C.V. site for more possible leads? They too are very helpful with sourcing parts and info.
Reply With Quote
The Following 2 Users Say Thank You to cobbadog For This Post:
  #31  
Old 07-06-2019, 08:16:44 AM
Eric Schulz's Avatar
Eric Schulz Eric Schulz is online now
Registered
 
Join Date: May 2009
Location: Horsham, Victoria, Australia
Posts: 361
Thanks: 55
Thanked 580 Times in 210 Posts
Default Re: HELP. Parts For 1923 Dodge Needed

Why can't these bearings be bought from a local bearing supplier? Are they such an odd size?

Eric
Reply With Quote
The Following User Says Thank You to Eric Schulz For This Post:
  #32  
Old 07-06-2019, 06:44:58 PM
Scotty 2 Scotty 2 is offline
Registered
 
Join Date: Mar 2011
Location: Warwick, Queensland, Australia
Posts: 2,927
Thanks: 1,967
Thanked 2,305 Times in 1,203 Posts
Default Re: HELP. Parts For 1923 Dodge Needed

Quote:
Originally Posted by Eric Schulz View Post
Why can't these bearings be bought from a local bearing supplier?
Eric
Hello Eric.
I don't know. Another 'helper' took the bearings to our local bearing shop and they could get one at a cost of $1,500.
Here are the bearings. Maybe some good hearted people could ask their bearing bloke?
Timken 366 - 363. We need 2.
Timken 422T - 414. We need 2
Timken 43125 - 43312. We need 1
Timken 26126 - 26283. We need 1. This one was quoted at $1,500.
I'm off to my bloke at Surplus Bearings at Springwood in Brisbane early this week. They have been simply brilliant in the past supplying me with bearings and seals.

Cheers Scott
Reply With Quote
The Following 2 Users Say Thank You to Scotty 2 For This Post:
  #33  
Old 07-07-2019, 06:34:14 AM
E27N's Avatar
E27N E27N is online now
Subscriber
 
Join Date: Jan 2008
Location: Quairading, Western Australia, Australia
Posts: 779
Thanks: 716
Thanked 793 Times in 291 Posts
Default Re: HELP. Parts For 1923 Dodge Needed

Re:The pricey one
Ex uk but only $348 https://www.ebay.com.au/itm/Timken-2...-/264266370785

Also seem like the mark 4 Jaguar used them in the front hubs.
__________________
I love the smell of 515 in the morning...
Reply With Quote
The Following User Says Thank You to E27N For This Post:
  #34  
Old 07-07-2019, 06:26:52 PM
Scotty 2 Scotty 2 is offline
Registered
 
Join Date: Mar 2011
Location: Warwick, Queensland, Australia
Posts: 2,927
Thanks: 1,967
Thanked 2,305 Times in 1,203 Posts
Default Re: HELP. Parts For 1923 Dodge Needed

Quote:
Originally Posted by E27N View Post
Re:The pricey one
Ex uk but only $348
Also seem like the mark 4 Jaguar used them in the front hubs.
Hello Mr E.
Yep, found it. $348 plus $35 for postage plus GST brings it up to around the $420. To think that that bugger has a box of them. Happy days for him I suppose.
A lot cheaper then $1,500 for sure. I'm surprised some enterprising sole hasn't had these made in China even if it's just for the Jag market. The same could be said about some of the Ronny Type N main bearings. $800 each if you can find them
I should be able to get to my bearing bloke today....hopefully.

Cheers and thanks
Scott
Reply With Quote
The Following 2 Users Say Thank You to Scotty 2 For This Post:
  #35  
Old 07-08-2019, 01:53:16 AM
Scotty 2 Scotty 2 is offline
Registered
 
Join Date: Mar 2011
Location: Warwick, Queensland, Australia
Posts: 2,927
Thanks: 1,967
Thanked 2,305 Times in 1,203 Posts
Default Re: HELP. Parts For 1923 Dodge Needed

Quote:
Originally Posted by Scotty 2 View Post
I should be able to get to my bearing bloke today....hopefully.
Hello all
I got to my bearing bloke today. He can get them all.
He's getting a price for the 2 sets of Timken 366 - 363 and the other 4 bearings come in at $720. That's a lot better then $1,500 for one.
I have to give a plug to Pete at SURPLUS BEARINGS at Slacks Creek in Brisbane. I've dealt with him for over 20 years and he's never failed me.
https://www.surplusbearings.com.au/
That's Pete in the video.

Cheers Scott
Reply With Quote
The Following 4 Users Say Thank You to Scotty 2 For This Post:
  #36  
Old 07-08-2019, 07:44:35 AM
cobbadog cobbadog is offline
Registered
 
Join Date: Aug 2009
Location: Coopernook. N.S.W. Australia
Posts: 1,912
Thanks: 3,425
Thanked 852 Times in 572 Posts
Thumbs up Re: HELP. Parts For 1923 Dodge Needed

Well done Scotty, a great saving for the Museum too.

This makes me ask the question if a new thread could be started for good suppliers of parts? I understand that they may not be Sponsors on this great site but they are local to us Down Under.
Reply With Quote
The Following User Says Thank You to cobbadog For This Post:
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

F o r u m Jump

Similar Threads Chosen at Random
Thread Thread Starter F o r u m Replies Last Post
1977 dodge pickup parts source Tracy T Antique Autos and Trucks 19 02-03-2019 09:44:01 PM
REO 1923 4 Cyl. Parts Source Needed! RustySteele Antique Autos and Trucks 3 05-25-2018 01:21:26 PM
Dodge Brothers 1 Ton Truck ID needed Saw Hoarder Antique Autos and Trucks 4 01-18-2015 08:56:36 PM
1923 George White Help Needed newsteamer Steam Stationary Engines, Traction Engines 6 03-21-2010 11:53:13 PM
need parts dor a 36 dodge pick up Canadian made Antique Autos and Trucks 2 12-11-2006 01:09:28 AM


Use "Ctrl" mouse wheel to change screen size.
All times are GMT -4. The time now is 05:43:35 PM.

Smokstak and Enginads site search!


All use is subject to our TERMS OF SERVICE
SMOKSTAK® is a Registered Trade Mark - A Community of Antique Engine Enthusiasts
Copyright © 2000 - 2019 by Harry Matthews P.O. Box 5612 - Sarasota, FL 34277