Generators and Electric Motors
[Home] - [HELP] - [Forums] - [Groups] - [Classified Ads] - [Subscribe] - [Books] - [Sponsors] -

Go Back   SmokStak > SmokStak® Vintage Electrical Equipment > Honda, Yamaha, Kawasaki, Isuszu Generators
Forgot Password? Join Us!

Notices

Honda, Yamaha, Kawasaki, Isuszu Generators Restoring, maintaining and operating Honda, Yamaha, Kawasaki, Isuszu, and clones.

Honda, Yamaha, Kawasaki, Isuszu Generators

EU7000is Updated GCU


this thread has 3 replies and has been viewed 1155 times

Reply
 
Thread Tools Display Modes
  #1  
Old 05-20-2018, 11:25:03 AM
orionpaxx orionpaxx is offline
Registered
 
Join Date: Feb 2016
Location: Warwick, Rhode Island, USA
Posts: 53
Thanks: 10
Thanked 13 Times in 9 Posts
Default EU7000is Updated GCU

Just a heads up, I have had multiple failures of my GCU.
This time I did the repair myself and ordered the new PN# GCU.
I noticed that Honda replaced the original with a newer PN.
I’m assuming they’ve made some changes to address some issues. Visually it appears the same although the conformal coating looked a little thicker.
But I did notice that l lot of the chips on the board had different values listed on them. So far so good. The engine started right up today on a damp day that would’ve been a problem with the old GCU. I will keep this thread updated. New GCU was only $290. The first time it was replaced under warranty it was $790, but covered.
Reply With Quote
The Following 3 Users Say Thank You to orionpaxx For This Post:
Sponsored Links
  #2  
Old 05-21-2018, 10:45:10 AM
malibus malibus is offline
Registered
 
Join Date: Jan 2017
Location: Prosser, Washington, USA
Posts: 2
Thanks: 2
Thanked 0 Times in 0 Posts
Default Re: EU7000is updated GCU

What is the new #?
Reply With Quote
  #3  
Old 05-21-2018, 11:52:53 AM
orionpaxx orionpaxx is offline
Registered
 
Join Date: Feb 2016
Location: Warwick, Rhode Island, USA
Posts: 53
Thanks: 10
Thanked 13 Times in 9 Posts
Default Re: EU7000is Updated GCU

34110-z37-a32
Reply With Quote
The Following User Says Thank You to orionpaxx For This Post:
  #4  
Old 02-21-2019, 04:32:41 AM
Smerleau Smerleau is offline
Registered
 
Join Date: Feb 2019
Location: Bellevue, Michigan, USA
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
Default Re: EU7000is Updated GCU

Why was the new GCU needed? What codes did it throw?
Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

F o r u m Jump

Similar Threads Chosen at Random
Thread Thread Starter F o r u m Replies Last Post
Which Oil to use for EU7000IS GeneratorNewb Honda, Yamaha, Kawasaki, Isuszu Generators 38 09-02-2019 06:49:24 AM
Eu7000is is Surging garza950 Honda, Yamaha, Kawasaki, Isuszu Generators 19 08-27-2019 02:49:52 PM
Honda EU7000is vs Eu6500is GeneratorNewb Honda, Yamaha, Kawasaki, Isuszu Generators 21 09-04-2018 09:57:36 AM
Honda EU7000is Parallel Kit MrRedHat Honda, Yamaha, Kawasaki, Isuszu Generators 38 07-01-2018 04:04:58 PM
Honda EU7000is Automatic Start Help! SunnyMark Honda, Yamaha, Kawasaki, Isuszu Generators 9 04-07-2018 11:35:48 AM


Use "Ctrl" mouse wheel to change screen size.
All times are GMT -4. The time now is 04:40:41 AM.

Smokstak and Enginads site search!


All use is subject to our TERMS OF SERVICE
SMOKSTAK® is a Registered Trade Mark - A Community of Antique Engine Enthusiasts
Copyright © 2000 - 2019 by Harry Matthews P.O. Box 5612 - Sarasota, FL 34277