Antique Engines and Old Iron
[Home] - [HELP] - [Forums] - [Library] - [Photo Gallery] - [Groups] - [Classified Ads] - [Subscribe] - [Links] - [Books] - [Sponsors] -

Go Back   SmokStak > SmokStak® Antique Engine Community > Small Air Cooled Gasoline Engines > Wisconsin Engines
Forgot Password? Join Us!

Notices

Wisconsin Engines Single cylinder up to V4 engines.

Wisconsin Engines

Wisconsin AENLD, Wanted/Needed:


this thread has 22 replies and has been viewed 2537 times

Reply
 
Thread Tools Display Modes
  #1  
Old 10-04-2017, 01:19:03 AM
dunngawn dunngawn is offline
Registered
 
Join Date: Sep 2017
Location: Pekin, Illinois
Posts: 12
Thanks: 2
Thanked 1 Time in 1 Post
Default Wisconsin AENLD, Wanted/Needed:

Fuel Tank w/brackets (Round or Square)
Magneto
Head
Variable Speed Governor Control
Engine Base

Bought a 1964 (January) "Thermo King" AENLD Sr.3684803, Sp. 155805 ?
w/centrifigal clutch, and extra large, extra capacity base and would like to set it up for practical use. It came with distributor/"timer" and contemplating installing mag., so it can "stand alone" And use the starter just to start. Would love to put charging system on it, but that is more money than I can swing at this point. Everything seems in excellent shape except exhaust valve was stuck.

Asante Sana, (thank you very much) Ron Addison
Reply With Quote
Sponsored Links
  #2  
Old 10-04-2017, 07:23:16 PM
Angus II Angus II is offline
Registered-I
 
Join Date: Sep 2017
Location: Mammoth Lakes, California, USA
Posts: 86
Thanks: 34
Thanked 32 Times in 21 Posts
Default Re: Wisconsin AENLD, Wanted/Needed:

Hello, Is this the engine you are looking for?. It is an AENLD. It's missing the tank and bracket, but the rest of it is there. Looks like it had an reduction box drive unit out put...
If it is, I can take abetter look at it on Sat. the 7th. for you. It is not mine (yet), but it is at a yard I go too. Let me know.
Just trying to help out, if I can.
I'm on the west coast.. But, if someone closer to you has it, it would be easier on shipping, I think.
Just a new guy trying to help, another.
Angus II
Attached Thumbnails
Click image for larger version

Name:	GEDC2622.jpg
Views:	176
Size:	230.0 KB
ID:	292830   Click image for larger version

Name:	GEDC2623.jpg
Views:	153
Size:	239.3 KB
ID:	292831   Click image for larger version

Name:	GEDC2624.jpg
Views:	129
Size:	174.3 KB
ID:	292832  
Reply With Quote
The Following User Says Thank You to Angus II For This Post:
  #3  
Old 10-04-2017, 11:04:28 PM
dunngawn dunngawn is offline
Registered
 
Join Date: Sep 2017
Location: Pekin, Illinois
Posts: 12
Thanks: 2
Thanked 1 Time in 1 Post
Default Re: Wisconsin AENLD, Wanted/Needed:

Identical except for the reduction box & mag. Got no other prospects at this point, lets see what happens for a few days. May be worth looking in to, but I've lost two sales on mounted 6.00 X 12 bar-cleats because of shipping. Not Cheap!

Thank you, Ron Addison
Reply With Quote
  #4  
Old 10-09-2017, 07:22:53 AM
edward moller edward moller is offline
Registered-I
 
Join Date: Apr 2007
Location: walhalla, sc
Posts: 245
Thanks: 1
Thanked 60 Times in 48 Posts
Default Re: Wisconsin AENLD, Wanted/Needed:

if you change the high cap oil pan, you will also have to change the oil pump assy. if your dist assy is complete with the cover, i would be interested in it. may trade oil pan & pump for it.
Reply With Quote
  #5  
Old 10-09-2017, 01:02:57 PM
dunngawn dunngawn is offline
Registered
 
Join Date: Sep 2017
Location: Pekin, Illinois
Posts: 12
Thanks: 2
Thanked 1 Time in 1 Post
Default Re: Wisconsin AENLD, Wanted/Needed:

The Dist. for my engine is a Prestolite, and I've found no evidence of any parts anywhere.
I need cap, rotor, points & condenser for it, so now you know my problem. Not done looking yet, but still trying to look ahead. Also trying to get this website figured out also, so I have not lost ALL hope yet.
Reply With Quote
  #6  
Old 10-09-2017, 07:56:32 PM
Zira Zira is offline
Subscriber
 
Join Date: Nov 2004
Location: Apex, North Carolina, USA
Posts: 1,700
Thanks: 371
Thanked 468 Times in 356 Posts
Default Re: Wisconsin AENLD, Wanted/Needed:

I have used mags, bases, oil pump parts (but honestly, I would leave the deep sump on there unless it causes you an alignment problem. I have some heads too but don't recall the condition. Not sure on the speed control parts but I can look. PM me if interested.

But...

The AENL is a common engine, and you are trying to make it a standard configuration. You can probably find a standard engine for less than you pay for part plus shipping.
Reply With Quote
  #7  
Old 10-09-2017, 10:57:20 PM
K-Tron K-Tron is offline
Registered-III
 
Join Date: Sep 2010
Location: Huntington, NY
Posts: 1,888
Thanks: 879
Thanked 948 Times in 657 Posts
Default Re: Wisconsin AENLD, Wanted/Needed:

It is too bad you are so far away. I'd trade you a running AENL for a complete or near complete Thermoking AENL with the deep sump and centrifugal clutch. Those engines are pretty hard to find. I personally think they are desirable because they are so different from your standard run of the mill AENL.

Chris
Reply With Quote
  #8  
Old 10-10-2017, 12:09:41 AM
dunngawn dunngawn is offline
Registered
 
Join Date: Sep 2017
Location: Pekin, Illinois
Posts: 12
Thanks: 2
Thanked 1 Time in 1 Post
Default Re: Wisconsin AENLD, Wanted/Needed:

The part # on the base starts with a "M". Is this a marine designation? I don't know much about the part # prefixes/suffixes but it seems to me to be simple, yet some of it does't add up yet. I have looked for a "code" list. & so far it has been evasive. I have had a few Wisconsins over the years, but have never needed too many parts or info.

The internet has changed a lot of things. dunngawn
Reply With Quote
  #9  
Old 10-10-2017, 07:25:58 AM
edward moller edward moller is offline
Registered-I
 
Join Date: Apr 2007
Location: walhalla, sc
Posts: 245
Thanks: 1
Thanked 60 Times in 48 Posts
Default Re: Wisconsin AENLD, Wanted/Needed:

good day, that dist does not use a cap,rotor. it has a flat metal cover that is held on by the retaining clips. it is a 1cyl, no need for a rotor. wire straight to negative side of the coil. the metal cover is unobtanium.
Reply With Quote
  #10  
Old 10-10-2017, 08:18:00 PM
John Newman, Jr.'s Avatar
John Newman, Jr. John Newman, Jr. is offline
Subscriber
 
Join Date: Apr 2005
Location: Saint Louis, Missouri, USA
Posts: 5,190
Thanks: 731
Thanked 3,086 Times in 1,594 Posts
Default Re: Wisconsin AENLD, Wanted/Needed:

I have a nice, complete MAENLD that I couldn't sell and had to bring back home from Portland a few years ago even after a couple of price reductions. Interested? You're not that far away....
It has a very short, but original PTO shaft. Unknown what it powered for the military.
__________________
John Newman, Jr.
Saint Louis, MO

I Can Probably Fix That
Reply With Quote
  #11  
Old 10-11-2017, 12:23:58 AM
dunngawn dunngawn is offline
Registered
 
Join Date: Sep 2017
Location: Pekin, Illinois
Posts: 12
Thanks: 2
Thanked 1 Time in 1 Post
Default Re: Wisconsin AENLD, Wanted/Needed:

I might be interested. What kind of money are you wanting for it?
Reply With Quote
  #12  
Old 10-11-2017, 04:32:49 PM
Angus II Angus II is offline
Registered-I
 
Join Date: Sep 2017
Location: Mammoth Lakes, California, USA
Posts: 86
Thanks: 34
Thanked 32 Times in 21 Posts
Default Re: Wisconsin AENLD, Wanted/Needed:

Hello, All
Hey, Dunngawn what is the OD of the out put shaft on your AENLD engine? I'm trying to match up some parts for an engine.
Thanks in advance.
Reply With Quote
  #13  
Old 10-11-2017, 07:26:25 PM
dunngawn dunngawn is offline
Registered
 
Join Date: Sep 2017
Location: Pekin, Illinois
Posts: 12
Thanks: 2
Thanked 1 Time in 1 Post
Default Re: Wisconsin AENLD, Wanted/Needed:

Angus II I think I messed up & answered in the wrong place. (Private Messages) My crankshaft is 1 1/8 diameter & 3 1/4 long w/1/4 key-way. there are some MAENLD's on ebay (new, but seeming reasonable to me)[military?] and you may want to look into one of them to see if that might be a wiser choice. don't recall the description giving diameter, but it said one inch long, and that should be long enough for a coupling. Hope I have helped. Ron dunngawn
Reply With Quote
  #14  
Old 10-12-2017, 11:41:58 AM
Angus II Angus II is offline
Registered-I
 
Join Date: Sep 2017
Location: Mammoth Lakes, California, USA
Posts: 86
Thanks: 34
Thanked 32 Times in 21 Posts
Default Re: Wisconsin AENLD, Wanted/Needed:

Hello, Thanks Ron for the info.
Reply With Quote
  #15  
Old 11-16-2017, 11:52:11 PM
dunngawn dunngawn is offline
Registered
 
Join Date: Sep 2017
Location: Pekin, Illinois
Posts: 12
Thanks: 2
Thanked 1 Time in 1 Post
Default Re: Wisconsin AENLD, Wanted/Needed:

Angus II - Did you get your engine running? Been trying to follow, & it is kind'a dangling. Just nosey. Ron
Reply With Quote
  #16  
Old 11-17-2017, 11:26:14 AM
Angus II Angus II is offline
Registered-I
 
Join Date: Sep 2017
Location: Mammoth Lakes, California, USA
Posts: 86
Thanks: 34
Thanked 32 Times in 21 Posts
Default Re: Wisconsin AENLD, Wanted/Needed:

Hello, Ron.
Thanks for asking. You're not nosy, just curious about a fellow members project.
No, I haven't got the engine running yet. There are a lot of things that needed to get done before snow season. Both personal and business wise.
I do have all the parts needed now (thanks Frank). The cam has been rebuilt and other parts cleaned up. I still need to switch out the crank gear and lap the valves. There has been some progress though.
Most of my time has been getting the fleet of 9 bobcats and the 2 Kabotas ready for the snow removal season. Hard facing chains, LOFs, R&R of parts and the sort. But, we are ready for when the snow does start too stick and pile up...
We dodged another bullet in the last 2 days with it raining not snowing, but it will get cold enough to snow.... it always does.
How is your project going? If you need any parts off that engine I posted, let me know.
I'm already looking at another Wisconsin engine, an AHHD; the big boy. I have three too choose from. It looks like I will be needing a carburetor for those, none have one. If anyone has a shop manual for an AHHD, let me know. I have the parts manual on pdf file, already.
I will post some more on my project with pictures on another thread, We have to keep this Wisconsin forum a little more active. Oh and I even have some pictures of some smaller old hit and miss type engines that I've come across.
Reply With Quote
  #17  
Old 01-25-2018, 10:20:11 PM
dunngawn dunngawn is offline
Registered
 
Join Date: Sep 2017
Location: Pekin, Illinois
Posts: 12
Thanks: 2
Thanked 1 Time in 1 Post
Default Re: Wisconsin AENLD, Wanted/Needed:

John _ Do you still have the AENLD? I have not lost interest, and opportunity has arisen.

Thank you, Ron Addison dunngawn@ hotmail.com
Reply With Quote
  #18  
Old 01-26-2018, 02:31:16 PM
John Newman, Jr.'s Avatar
John Newman, Jr. John Newman, Jr. is offline
Subscriber
 
Join Date: Apr 2005
Location: Saint Louis, Missouri, USA
Posts: 5,190
Thanks: 731
Thanked 3,086 Times in 1,594 Posts
Default Re: Wisconsin AENLD, Wanted/Needed:

Yes, I do. PM me and we can discuss details.
__________________
John Newman, Jr.
Saint Louis, MO

I Can Probably Fix That
Reply With Quote
  #19  
Old 01-26-2018, 08:37:21 PM
Ogrebeast64 Ogrebeast64 is offline
Registered-I
 
Join Date: Jun 2017
Location: Baltimore, Ohio
Posts: 158
Thanks: 121
Thanked 47 Times in 42 Posts
Default Re: Wisconsin AENLD, Wanted/Needed:

I have an old Wisconsin sitting on my porch that has the coil/points setup, with the cover intact. No idea what type because there is no ID plate on the engine. I know it was a 12 volt system because I'm using the Starter/Generator off it to keep batteries topped up.
Reply With Quote
  #20  
Old 01-26-2018, 11:40:47 PM
dunngawn dunngawn is offline
Registered
 
Join Date: Sep 2017
Location: Pekin, Illinois
Posts: 12
Thanks: 2
Thanked 1 Time in 1 Post
Default Re: Wisconsin AENLD, Wanted/Needed:

Would be very interested if closer, or going that-a-way, but can't at this time, many thanks anyway.
Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

F o r u m Jump

Similar Threads Chosen at Random
Thread Thread Starter F o r u m Replies Last Post
Wisconsin AENLD Before and After OnanParts Wisconsin Engines 2 08-26-2014 02:53:52 PM
wisconsin aenld dirtycurt Wisconsin Engines 11 04-25-2012 08:33:12 AM
Wisconsin AENLD AndyG Wisconsin Engines 3 11-12-2009 09:51:22 PM
Wisconsin AENLD Bill Sherlock Wisconsin Engines 4 05-09-2009 02:05:52 AM
Wisconsin AENLD Ken Antique Engine Archives 2 11-17-1999 12:10:03 AM


Use "Ctrl" mouse wheel to change screen size.
All times are GMT -4. The time now is 03:54:20 AM.

Smokstak and Enginads site search!


All use is subject to our TERMS OF SERVICE
SMOKSTAK® is a Registered Trade Mark - A Community of Antique Engine Enthusiasts
Copyright © 2000 - 2019 by Harry Matthews P.O. Box 5612 - Sarasota, FL 34277