Antique Engines and Old Iron
[Home] - [HELP] - [Forums] - [Groups] - [Classified Ads] - [Subscribe] - [Books] - [Sponsors] -

Go Back   SmokStak > SmokStak® Antique Engine Community > Hit & Miss Gas Engine Discussion
Forgot Password? Join Us!

Notices

Hit & Miss Gas Engine Discussion Meet collectors of hit and miss engines, ask questions about collecting, restoring and showing antique flywheel engines.

Hit & Miss Gas Engine Discussion

Stover Air Starting Instructions


this thread has 1 replies and has been viewed 1138 times

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 12-30-2010, 09:41:42 AM
LeRoy IHC LeRoy IHC is offline
Subscriber
 
Join Date: Feb 2005
Location: Spring Grove, Pennsylvania, USA
Posts: 630
Thanks: 365
Thanked 4,020 Times in 397 Posts
Default Stover Air Starting Instructions

Hello to All and Happy New Year!

I have 2 large Stover Horizontal Gas Engines a 16 Hp. and a 18 Hp. It is my understanding that all the large engines sold by Stover were equipped with a hand pump to pump air into the cylinder for starting. Both my engines are drilled for the pump, but the pumps are long gone. In the pictures I have gotten from Joe Maurer the air pump looks exactly like the pumps used on Fairbanks Type N engines. Except the pump is mounted on the opposite side of the engine. I'm in the process of making 2 pumps for my engines. My question is this Do you set the engine at TDC of the intake stroke? I'm guessing this is what you do and then you prime the cylinder with gasoline and then you build compression in the cylinder by pumping up the air pump. Once you have some pressure built up in the cylinder then you snap the ignitor to fire the charge. Am I correct about this or am I way off base?

Any and all help will be greatly appreciated.

Thanks
LeRoy Baumgardner
Reply With Quote
 

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

F o r u m Jump

Similar Threads Chosen at Random
Thread Thread Starter F o r u m Replies Last Post
Starting instructions for a flyball Gov. Blackstone Mike O Hit & Miss Gas Engine Discussion 7 12-19-2009 10:09:04 PM
Stover 2.5HP CT-2 Operating Instructions Tom Herd Hit & Miss Gas Engine Discussion 1 10-20-2008 01:37:58 PM
Need timing instructions for Stover model "Y" chase Antique Engine Archives 0 07-20-2003 01:38:27 PM
FB ZC 118 Starting Instructions. Roger Antique Engine Archives 0 08-12-2001 11:29:43 PM
Starting Stover RobertSsmales Antique Engine Archives 5 06-03-2000 08:46:33 AM


Use "Ctrl" mouse wheel to change screen size.
All times are GMT -4. The time now is 07:08:42 PM.

Smokstak and Enginads site search!


All use is subject to our TERMS OF SERVICE
SMOKSTAK® is a Registered Trade Mark - A Community of Antique Engine Enthusiasts
Copyright © 2000 - 2019 by Harry Matthews P.O. Box 5612 - Sarasota, FL 34277