• The old site search from Google needs to be updated. Use the Search at the Upper Right, or use What's New in the center - it has a drop down arrow. You will need to change your Favorits by right click mouse and clicking favorites. Many of the posts in How to Use This Web Site are old so the links may or may not work. I have one hell of a lot of work to do!

Lincoln /weldanpower 125


New member
Hi there have a Lincoln weldanpower 125 welder at present it's not giving no out put ,current at all ,if any one could just point me in the direction of what is the first thing to do look for or in any way assist it be most appriciated,what I did so far is check the slip rings on the amerture that's fine the fieldcoil don't know exactly how to check for continuity .with the wires and finally which wires do you use to excite the field .?


Have you looked on the Lincoln site for the manual if you can't find it give me your model and serial number and I'll find it for you.


New member
Hey thanks for that ,but I have the manual that came with it.

---------- Post added at 03:55 PM ---------- Previous post was at 03:45 PM ----------

So far I check the rectifier and that is bad ..what I would like is the resistance value for the field coil.