If you like antique engines, vintage tractors or old iron machinery, register and join us. When you register on Smokstak, please give complete answers and fill in the blanks. - IF YOU ARE ON WIRELESS OR SATELLITE, ENTER YOUR CITY AND STATE! NO ZIPCODES! All registrations are manually approved.
The section that has been closed for about two years is open in theory, I don't drive it so I have no idea. There has been problems that have resulted in I-75 north bound being closed off and on above 8 mile road due to a cascading number of pot holes and canyons. Here is the link for the roads in Michigan after it opens just click on the cone icon. https://mdotjboss.state.mi.us/MiDrive/map?reset=true
well the rebuild on I75 will be starting and be finished around Thanksgiving lanes will be reduced both directions. It runs from 12 mile to just south of M-59 Ramps will also be closed. https://mdotjboss.state.mi.us/MiDrive/map?reset=true Hit the cone icon upper left corner of the map for the spring time blossoming of the cone flowers.
Another construction update, They have started closing I-94 in both directions, on the week ends in assorted locations For bridge removal and replacement. https://mdotjboss.state.mi.us/MiDrive/map?reset=true Click on the cone icon upper left corner. They also have ramp closures. the closures will be going on All spring and summer
Set up starts this week for the show, see you this week end. Anybody coming check the MDOT web site for construction info as they are closing assorted sections over the weekends on I-94 and reduced lanes on I-765 both directions.
Show floor and arena is ready for this week end, There will be a total closure of south bound I-75 starting 4/26 Friday 9pm till 4/29 Monday 5am. I-75 section that has been closed for the last 2 years is open and smooth sailing both directions. It is clear from the bridge from Canada to Wyandotte
I wait all year for this one. It is about one mile from my home in Wyandotte. My son brought video for me to see maybe 23 years ago, I was hooked. Wish I was a camera guy, I would try to put something up. Hope to see a QC tool post set up for my lathes. Hopefully some bits and pieces and see some friends. Have been enjoying Smokstak , just found you about a week ago. Spent a lot of time cleaning my shop, with finding the site & the upcoming show getting me worked up.
Well the show floor was filling up with exhibitors and vendors. If you are coming in on either Saturday or Sunday make sure you check the MDOT map of construction projects before leaving home Use the cone icon upper left corner on the map page as there is some week end only work and closures