• If you like antique engines, vintage tractors or old iron machinery, register and join us. When you register on Smokstak, please give complete answers and fill in the blanks. - IF YOU ARE ON WIRELESS OR SATELLITE, ENTER YOUR CITY AND STATE! NO ZIPCODES! All registrations are manually approved.

Thank You Wayne Ticel- Reid transfer valve tool

IronworkerFXR

Subscriber
Last Subscription Date
09/06/2020
Humm, I thought it would look like a spanner wrench or gland nut wrench with a big open center to get to the nut for adjusting ?.
So I am at a loss here .:rolleyes:
 

W.P.Klein

Sponsor
Last Subscription Date
01/19/2020
I thought it would look like a spanner wrench or gland nut wrench with a big open center to get to the nut for adjusting ?.
So I am at a loss here .
The right end (in the pic) is a typical hex socket to loosen the center nut and the left end fits into the spool bore and has a center hole to allow the threaded shank of the valve to pass thru. Bill Klein
 
Top