• If you like antique engines, vintage tractors or old iron machinery, register and join us. When you register on Smokstak, please give complete answers and fill in all blanks. IF YOU ARE ON WIRELESS OR SATELLITE, GIVE YOUR CITY AND STATE! NO ZIPCODES! All registrations are manually approved.

Wanted: These heavy duty hose clamps, photos enclosed

MSchreiber

Subscriber
I need a few 2 1/4" and few 2 9/16" ID's. They are .078" thick and 3/4" wide. NOT the skinny thin 1's on the left. TIA




They could be "SHERMAN SHURE GRIP" manufacture and or marked "ALLEN CHICAGO"

 

MSchreiber

Subscriber
Thanks 4 the effort, i found new sherman "nos ones the sizes i need costing about $10 each. I'm hoping someone has old used 1's for less as these going on original unrestored engines. I can't believe someone put 1 or 2 cheesy modern stainless clamps on these machines.

mike
 

MSchreiber

Subscriber
Those and a few other places, average total cost per clamp $10. I'm gonna hold out for used for now. Shows 5 months away.
thanks again,
mike
 
Top