• If you like antique engines, vintage tractors or old iron, please register and join us. When registering, please provide your CITY and STATE as your location!

TITAN 2 man saw info needed

kevinsch

Registered
Hello to all - I'm new to this site. I recently purchased a Titan 2 man saw and am looking for info on it - parts, manuals, whatever. The motor is stuck and I have heard to use everything from WD40 to Coca-Cola to loosen it up. I need both cylinder shrouds (missing), recoil handle and air cleaner holddown bolt. Probably a few more things, once I tear into it.
The only information I've been able to find so far is from an ebay ad that shows a Titan Bluestreak saw which looks like mine. Are the parts that hard to locate? Any and all information will be greatly appreciated. Thank you.
 

Rusty Brizendine

Registered
Age
70
I have a friend that I think has a manual for a titan saw. email me and I will put you in touch with them. They could send you a picture of it. I saw it, it was in real nice shape. Rusty B.oregon
 

CM76

Registered
Nice find on the Titan.
Parts are not easy to find for the old Titan saws - you see the odd part come up on ebay etc, but the best bet is to advertise on here or some of the various saw forums online.
The cylinder covers are often missing, as they easily fall off. A number of collectors have fabricated replacement covers which have been high quality copies of the originals. The ignition coils can be found on ebay, and are the same coil used in the Maytag twin washing machine unit. These coils are not cheap, but they are new coils and not old stock which can fail prematurely.
The Blue streak is the most common of the Titan twins so hopefully you will eventually find those parts and get it running again.
 

alvieandrews

Registered
Hello to all - I'm new to this site. I recently purchased a Titan 2 man saw and am looking for info on it - parts, manuals, whatever. The motor is stuck and I have heard to use everything from WD40 to Coca-Cola to loosen it up. I need both cylinder shrouds (missing), recoil handle and air cleaner holddown bolt. Probably a few more things, once I tear into it.
The only information I've been able to find so far is from an ebay ad that shows a Titan Bluestreak saw which looks like mine. Are the parts that hard to locate? Any and all information will be greatly appreciated. Thank you.
 
Top