• If you like antique engines, vintage tractors or old iron machinery, register and join us. When you register on Smokstak, please give complete answers and fill in the blanks. - IF YOU ARE ON WIRELESS OR SATELLITE, ENTER YOUR CITY AND STATE! NO ZIPCODES! All registrations are manually approved.

Wright Reciprocating Saw

cabin1cnm82

Registered
Wright Reciprocating saw. I have a wright model B 520 I rebuilt the carb and had weak spark so installed new points and condenser within point setting at .025 gap now have no spark. I didn't change timing. So did do wrong?? I know about throttle setting to get spark. Any help would be appreciated. Cabin1
 

Craig A

Moderator
Staff member
Age
68
Last Subscription Date
12/20/2015
Welcome to STAK...…. :)
I moved your question to a better forum for answers.
 

gdstew

Registered
Some new points have a coating on them and need to be cleaned before installing. Also a good cleaning after being set with a greasy feeler gauge. ( I've seen it done!) Setting might be a little wide, .018 - .020" might be closer but this is a guess. Hope somebody has the actual setting.
 
Top